User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the appliance
- Caring for the environment
- -
- Connection
- Using the supplied accessories
- Use
- Setting down and storing the vacuum cleaner
- Maintenance
- Cleaning and care
- Problem solving guide
- Service
- Optional accessories
- Purchasing accessories
- Floorheads / brushes
- TurboTeQ Turbobrush (STB 305-3)
- Parquet Twister floorbrush with swivel action (SBB 300-3)
- Parquet Twister XL floorbrush with swivel action (SBB 400-3)
- Other accessories
- Turbo Mini hand turbobrush (STB 101)
- Universal brush (SUB 20)
- Radiator brush (SHB 30)
- Mattress nozzle (SMD 10)
- Crevice nozzle, 300 mm (SFD 10)
- Crevice nozzle, 560 mm (SFD 20)
- XL upholstery nozzle (SPD 20)
- Electrical connection
Warning and Safety instructions
5
Compare the connection data on the data plate of the vacuum
cleaner (mains voltage and frequency) with that of the mains electri-
city supply. This data must match exactly. Without modifications, the
vacuum cleaner is suitable for 50Hz or 60Hz.
The mains electrical outlet must be fitted with an appropriate cir-
cuit breaker.
Temporary or permanent operation with a self-sufficient or non-
mains synchronous energy supply system (e.g. isolated networks,
back-up systems) is possible. A requirement for the operation is that
the energy supply system complies with all current local and national
requirements that apply to stand-alone, solar and/or battery sys-
tems.
The protective measures provided in the domestic installation and in
this Miele product must also be assured in their function and opera-
tion in isolated operation or in non-mains synchronous operation, or
replaced with equivalent measures in the installation.
Do not pull or carry the vacuum cleaner by the cable, and be care-
ful not to damage the cable when withdrawing the plug from the
socket. Keep the cable away from sharp edges and do not let it get
squashed, for example, under a door. Avoid running the vacuum
cleaner over the cable. This could damage the cable, plug or socket.
The appliance must not be used if any of these have suffered dam-
age.
Do not use the vacuum cleaner if the cable is damaged. If the
cable is damaged it must be replaced together with a complete
cable rewind. For safety reasons this must only be done by Miele
Service or a Miele authorised service technician.
Repairs should only be undertaken by a Miele authorised service
technician. Otherwise the warranty will be invalidated.
Repairs and other work by unqualified persons can cause consid-
erable danger to users.