Fully Integrated 24” MasterCool K 2601 Vi / K 2611 Vi F 2661 Vi / F 2671 Vi KWT 2601 Vi / KWT 2611 Vi KWT 2661 ViS / KWT 2671 ViS Shown: KWT 2661 ViS Info subject to change 8mieleusa.
Fully Integrated 24” MasterCool SPECIFICATIONS Overall Unit Dimensions 233/4” (604 mm) W x 833/4”- 853/16” (2127 - 2164 mm) H x 24” (610 mm) D [Depth does not include door panel] Niche 24” (610 mm) W* x 84” - 853/16” (2134 - 2164 mm) H x 243/4” (629 mm) D Minimum Cabinet Niche Opening Electrical Electrical Requirements K 26x1 Vi KWT 26x1 Vi Power Cord Plumbing F 26x1 Vi 110V / 120V, 60Hz, 15 Amps In the case of side-by-side installations, a separate outlet must be used for each appliance.
Fully Integrated 24” MasterCool CUTOUT DIMENSIONS • Niche depth assumes a 3/4” (19 mm) panel, please adjust according to custom panel thickness CUTOUT DETAILS • The electrical connection must not be positioned higher than 9” (228.6 mm) above the floor. • The 1/4” (6.4 mm) plumbed water connection should not be positioned higher than 2” (50.8 mm) above the floor. Notes: In case of an emergency the electrical outlet must be easily accessible and must not be concealed behind the appliance.
Fully Integrated 24” MasterCool POWER SUPPLY AND WATER CONNECTION (Water Connection For F 26x1 Vi Only) Rear View Water Connection: • 1/4” water line is required • Located at the rear of the appliance on a 4’ 11” line. • 1/4” compression fitting, ready to accept 1/4” line. Side View Notes: • In case of an emergency the electrical outlet and water shutoff must be easily accessible and must not be concealed behind the appliance.
Fully Integrated 24” MasterCool CUSTOM PANEL INSTALLATIONS These units do not come equipped with a front panel. They are designed to accept a custom door panel supp For Models: For Models: For Models: the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surroun • KWT 2601 Vi • KWT 2611 Vi • K 2601 Vi • K 2611 Vi • F 2661 Vi • F 2671 Vi cabinets.
Fully Integrated 24” 1MasterCool 15° Door HINGING ThDETAILS ickne115° ssOPENING options 0-1/8" Available for the following models: • K 26x1 Vi • F 26x1 Vi • KWT 26x1 Vi(S) 0-1/8” (3 mm) 1-3/8”(35mm) 1-1/6” (29.6mm) 17/24” (18mm) 1/4”(6.4mm) 0-3/4” (19 mm) 0-3/4" 1” (25 mm) 1" 1-1/4” (32 mm) 1-1/4" 1-1/2” (38 mm) 1-1/2" 1-3/4” (44 mm) 1-3/4" Cabinet Front 2-5/8” (67mm) 2-1/3” (59mm) 2-1/24”(52mm) 0-3 /4” mm ) ) ) ) 1-3/4”(44.
Fully Integrated 9MasterCool 0° Door 24” Thickness options Thickness HINGING DETAILS 90° OPENING 0-3/4” (19 mm) 0-3/4" 1” (25 mm) 1" 1-1/4” (32 mm) 1-1/4" 1-1/2” (38 mm) 1-1/2" 1-3/4” (44 mm) 1-3/4" 2” (51 mm) 2" 90° Door 1-3/16” (30mm) 1-7/16” (36.5mm) 7/16” (11 mm) 0-1/8" Available for the following models: • K 26x1 Vi • KWT 26x1 Vi(Si) 0-1/8” (3 mm) 115° Door 1-1/2" 1-3/4" Thickness options1-11/16” (43mm) 1-15/16” (49.