Installation Instructions 30" Electric, 30" Induction Range 30", 36" All Gas Range 30", 36", 48" Dual Fuel Range To prevent accidents and damage to the range, you must read all instructions supplied before installing or using the appliance. en-US, CA M.-Nr.
IMPORTANT SAFETY INSTRUCTIONS WARNING Children and adults can tip over the range if has not been secured. This may lead to fatal injuries. This range must be secured and connected using the anti-tip device according to the installation instructions. If you have moved the range, slide the locking latch onto the antitip device until you feel it lock into place. Do not use the range if the anti-tip device has not been properly installed and engaged.
IMPORTANT SAFETY INSTRUCTIONS WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury, or death. – Do not use or store gasoline or other combustible liquids or vapors in the vicinity of this or any other appliance. – WHAT TO DO IF YOU SMELL GAS – Do not try to light any appliance. – Do not touch any electric switches. – Do not use any phones inside your building.
Contents IMPORTANT SAFETY INSTRUCTIONS ................................................................ 2 IMPORTANT SAFETY INSTRUCTIONS ................................................................ 6 Notes on installation ........................................................................................... Model numbers .................................................................................................... Data plate .....................................................................
Contents Detailed views of HR 1954 .................................................................................... 83 Detailed views of HR 1955 .................................................................................... 87 Detailed views of HR 1956 .................................................................................... 91 Anti-tip device...................................................................................................... 95 Before installation.....................
IMPORTANT SAFETY INSTRUCTIONS When using the appliance, follow basic safety precautions, including the following: Read all instructions before installation and use of the range to prevent accidents and machine damage. This range complies with current safety requirements. However, improper use of the appliance can result in personal injury or damage to property. Please read the installation instructions carefully before installing and connecting the appliance.
IMPORTANT SAFETY INSTRUCTIONS Use This range is intended for domestic use and use in other similar environments. This appliance is not intended for outdoor use. Use the range exclusively under normal domestic conditions: – Use the oven for baking, roasting, broiling, defrosting, canning and drying food. – Use the stovetop to prepare food and keep it warm. Any other use is not permitted. Risk of Fire! Do not use this oven to store or dry combustible materials.
IMPORTANT SAFETY INSTRUCTIONS Children Children must be kept away from the range unless constantly supervised. Please supervise any children in the vicinity of the range and do not let them play with the appliance. Burn hazard from improper use! Do not allow children to operate the oven. Danger of suffocation! Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions. Contact Miele’s Technical Service Department for examination, repair or adjustment. Repairs and other work by unauthorized persons could be dangerous and may void the warranty.
IMPORTANT SAFETY INSTRUCTIONS During installation, maintenance and repair work, e.g. if the oven lighting is broken (see "Frequently asked questions"), the range must be completely disconnected from the household electricity supply. The gas supply must be shut off. Ensure that this is the case by: – removing the fuse, – "tripping" the circuit breaker, or – unplugging the unit. Pull the plug not the cord. – Shut off the gas supply and, if necessary, disconnect the range from the gas line.
IMPORTANT SAFETY INSTRUCTIONS In order for the range to function properly, it requires an adequate supply of cool air. Ensure that the air flow is not impaired. Also be sure that the cool air supply is not excessively heated by other heat sources (e.g. solid fuel stoves). If the range is installed behind a cabinet door, do not close the door while the appliance is in operation.
IMPORTANT SAFETY INSTRUCTIONS Preparing your appliance for an extended vacation If you elect to turn off the water to your home for an extended period of time, please note that this may not be enough to reduce the risk of a leak. To be completely safe, you must turn off the water supply to each individual appliance. Cleaning and care Do not use a steam cleaner to clean the range. The steam may reach electrical components and cause a short circuit.
Notes on installation Model numbers Items included with this range A list of the ovens described in these operating instructions can be found on the back page. The range is supplied with: Data plate – Installation Instructions, – Multiple operating instructions (depending on model) for: The data plate is behind the toe-kick. The toe-kick cover is attached to the base of the range by magnets so it can be removed and put back again easily.
Notes on installation Installation of the drip tray The drip tray covers the gap between the oven cavity and the door. Open the oven door. Lay the drip tray over the gap between the oven cavity and the door. Close the oven door.
Notes on installation Assembling the grill Burn hazard! The burners must be turned off and allowed to cool completely. Risk of injury! The cast-iron grill is heavy. Carry the grill carefully and place it securely on a soft base so that it lies flat. Place the grill into position. Cleaning and care Tip: All parts can be disassembled in the reverse order. You can also remove the frame for cleaning.
Notes on installation Optional accessories All accessories and cleaning products listed in these instructions are designed to be used with the Miele range. These can be ordered from the Miele website (see end of this booklet for contact details). When ordering, please have your model number available. RBGAG All Gas Backguard/RBGDF Dual Fuel Backguard Depending on the model, you can exchange the existing island trim of your appliance for a larger range backguard.
Notes on installation 1 2 3 1 a Backguard b Rear panel backguard c Inside panel Place the backguard face down on a soft surface to avoid scratching. The lower edge should line up with the edge of the table, so that the backguard lies flat. Loosen the screws on the back of backguard. 2 Remove the rear panel and the inner panel . a Backguard b Range Slide the backguard from above on the air duct extenders.
Notes on installation 20" Backguard Once the backguard is placed on the range push the backguard backwards. Install the inner panel and the rear panel on the backguard using the screws provided. Install the backguard on the range using the screws provided.
Notes on installation RBS Backsplash The backsplash is intended for installation to a Miele Range Hood (DAR model). Observe the installation instructions of the Miele Range Hood. XKM 3000 W Remote Vision Depending on the model, the range maybe compatible with TM RemoteVision . TM In order to use the RemoteVision monitoring service, you will require a XKM 3000 W Communication Module. Refer to the Operating and Installation Instructions of the Miele XKM 3000 W Communication Module.
Notes on installation Do not carry or lift the range by the oven door handle or the control panel! The range is heavy. Due to the size and weight of the appliance, installation should be performed by two people. The net weight of the range with accessories is as follows: Model Width Net weight incl. accessories: HR 1421 HR 1622 HR 112x HR 192x 29 15/16" approx. 307 lbs (140 kg) HR 113x HR 193x 35 15/16" HR 195x 47 15/16" (760 mm) approx. 405 lbs (180 kg) (913 mm) approx.
Notes on installation Required connections Model Electrical connection Gas connection Plumbing HR 1421 X – – HR 1622 X – X HR 112x HR 113x X X – HR 192x HR 193x HR 195x X X X X Connection required – Connection not provided 21
Electric Range dimensions HR 1421; HR 1622 2 , , The shaded area represents the installation area for the connections: E = Electrical connection, W = Water connection (only HR 1622) 22
Electric Range dimensions HR 1421; HR 1622 Position Dimensions Description 13" (330 mm) Maximum depth of top cabinet 18" (547 mm) Minimum distance to bottom edge of top cabinet 35 1/2"–37" (901–940 mm) Distance from the floor to cooktop surface Min. 30" (762 mm) 30" (762 mm) or 24" (609 mm) Width of cabinet opening Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface.
Electric Range dimensions Detailed views of HR 1421 Side view of HR 1421 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 24 15/16" (633mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment 5" - 6 1/2" (127 mm - 165.
Electric Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1421 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Electric Range dimensions Front side view of HR 1421 28 1 (7mm) 1/4" (43mm) 1 11/16" " /16 6.6 (56 5 " /16 m) 13 0.85m (2 " /16 ) 2 9 .2mm (65 22 5 /8" (574 .6mm 5/16 " ) (760 mm) " 1/8 (x) = Depending on the appliance height adjustment 5" - 6 1/2" (127 mm - 165.1 mm) m) (3m 17 13/16" (452.2mm) (34mm) 1 5/16" 8 1/8" (207mm) mm) 20 29 1 26 (712 m) 5m (x) 35 1/2" - 37" (901.7mm - 939.
Electric Range dimensions 30 5/8" (778.5mm) Rear view of HR 1421 E 24 3 /8 " (619 .
Electric Range dimensions Detailed views of HR 1622 Side view of HR 1622 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 24 15/16" (633mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment 5" - 6 1/2" (127 mm - 165.
Electric Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1622 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Electric Range dimensions Front side view of HR 1622 28 1 (7mm) 1/4" 20 (43mm) 1 11/16" 6 5/1 6.6 (56 1 .8 (20 " /16 ) 2 9 .2mm (65 /8" 29 1 (574 .6mm 5/16 " ) (760 mm) " 1/8 (x) = Depending on the appliance height adjustment 5" - 6 1/2" (127 mm - 165.1 mm) m) (3m /4" m) 2m (69 1 " 27 1/16 (- 6" ) 3/1 5mm 17 13/16" (452.2mm) (34mm) 1 5/16" 8 1/8" (207mm) mm) " 22 5 30 (712 m) 5m (x) 35 1/2" - 37" (901.7mm - 939.
Electric Range dimensions 5 7/8" (149mm) Rear view of HR 1622 30 5/8" (778.5mm) W 31 E 24 3 /8 (81.8 /4" mm) " (619 .
All Gas Range dimensions All Gas Range HR 11xx with Standard Burner Configuration (M Pro Power Plus) HR 1124, HR 1134, HR 1135, HR 1136 If a BTU-reducing kit is necessary, an authorized installer is required to modify the product to meet ANSI Z21. 2 In case of combustible materials, a minimum distance of 6" must be observed on each side in addition to dimension .
All Gas Range dimensions HR 1124 Position Dimensions Min. 30" (762 mm) 6" + + 6" (150 mm + + 150 mm) Description Width of cabinet opening If combustible materials are present, an additional minimum distance of 6" (150 mm) (each side) is required. Ensure that local codes are observed. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface.
All Gas Range dimensions HR 1134 Position Dimensions Min. 36" (914 mm) 6" + + 6" (150 mm + + 150 mm) Description Width of cabinet opening If combustible materials are present, an additional minimum distance of 6" (150 mm) (each side) is required. Ensure that local codes are observed. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface.
All Gas Range dimensions HR 1135, HR 1136 Position Dimensions Min. 36" (914 mm) 6" + + 6" (150 mm + + 150 mm) Description Width of cabinet opening If combustible materials are present, an additional minimum distance of 6" (150 mm) (each side) is required. Ensure that local codes are observed. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface.
All Gas Range dimensions All Gas Range HR 11xx with BTU-reducing kits (M Pro Power - Zero Gap; M Pro - Décor Hood) HR 1124, HR 1134, HR 1135, HR 1136 For Miele Range-Hoods and Miele Range-Décor Hoods: If a BTU-reducing kit is necessary, an authorized installer is required to modify the product to meet ANSI Z21. Jets are a standard accessory and are getting changed during installation, see "Combination Range with BTU-reducing kit".
All Gas Range dimensions HR 1124 Position Dimensions Min. 30" (762 mm) Description Width of cabinet opening Please contact Miele Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 30" (762 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XL blower). Please refer to Miele ventilation hood installation manual.
All Gas Range dimensions HR 1134 Position Dimensions Min. 36" (914 mm) Description Width of cabinet opening Please contact Miele Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 36" (914 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XL blower).
All Gas Range dimensions HR 1135, HR 1136 Position Dimensions Min. 36" (914 mm) Description Width of cabinet opening Please contact Miele Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 30" (762 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XL or DRxB XXL blower). Please refer to Miele ventilation hood installation manual.
All Gas Range dimensions Detailed views of HR 1124 Side view of HR 1124 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment 5" - 6 1/2" (127 mm - 165.
All Gas Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1124 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
All Gas Range dimensions Front side view of HR 1124 (708 mm) 1/4" (7mm) (43mm) " /16 m) 130.85m (2 " /16 ) 2 9 .2mm (65 (574 .6mm ) (760 mm) " 1/8 (x) = Depending on the appliance height adjustment 5" - 6 1/2" (127 mm - 165.1 mm) m) (3m 17 13/16" (452.2mm) (34mm) 1 5/16" 8 1/8" (207mm) 1 11/16" 27 22 5 /8" 29 1 5/16 " 42 m) 2m (69 (x) 35 1/2" - 37" (901.7mm - 939.
All Gas Range dimensions Rear view of HR 1124 30 5/8" (778.5mm) G E 24 3 /8" (619 .9mm ) 2 15 /16" (75.
All Gas Range dimensions Detailed views of HR 1134 Side view of HR 1134 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.
All Gas Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1134 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
All Gas Range dimensions Front side view of HR 1134 34" (8 64.4 mm (45 (40mm) " /16 mm) 13 5 0.8 " /16 ) 2 9 .2mm 17 13/16" (65 27 (452.2mm) (43mm) (2 (x) 35 1/2" - 37" 1 9/16" 1/4" (7mm) (34mm) 1 5/16" /4" 1 3 mm) 1 11/16" (901.7mm - 939.8mm) 8 1/8" (207mm) (40mm) 1 9/16" ) 28 5 /8" (72 7mm ) 5/16 " (9 35 1 13m m ) " 1/8 m) (3m (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.
All Gas Range dimensions Rear view of HR 1134 30 5/8" (778.5mm) G 27 3 E /8" (6 96.1 m m) 33 (94.
All Gas Range dimensions Detailed views of HR 1135 Side view of HR 1135 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.
All Gas Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1135 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
All Gas Range dimensions Front side view of HR 1135 34" (8 64.4 m (45 (40mm) " /16 ) 13 .85mm 17 13/16" (65 2 28 5 /8" (7 27m m) 35 1 5/16 " (913 mm) (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.1 mm) 50 /1 (-1 (452.2mm) (43mm) " /16 ) 2 9 .2mm ) m 2m (69 m) /4" -2m 7 1 6" / (20 (x) 35 1/2" - 37" 1 9/16" 1/4" (7mm) (34mm) 1 5/16" /4" 1 3 mm) 1 11/16" (901.7mm - 939.
All Gas Range dimensions Rear view of HR 1135 30 5/8" (778.5mm) G 27 3 E /8" (6 96.1 m m) 33 (94.
All Gas Range dimensions Detailed views of HR 1136 Side view of HR 1136 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment:5" - 6 1/2" (127 mm - 165.
All Gas Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1136 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
All Gas Range dimensions Front side view of HR 1136 34" (8 64.4 (45 (40mm) " /16 mm) 13 .85 " 1/4 (43mm) (20 27 -1/16" / -2 17 13/16" (65 (452.2mm) " /16 ) 2 9 .2mm 28 5 /8" (7 27m m) 35 1 5/16 " (913 mm) (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.1 mm) 54 m) 2m (69 m) m ( (x) 35 1/2" - 37" 1 9/16" 1/4" (7mm) (34mm) 1 5/16" /4" 1 3 mm) 1 11/16" (901.7mm - 939.
All Gas Range dimensions Rear view of HR 1136 30 5/8" (778.5mm) G 27 3 E /8" (6 96.1 m m) 33 (94.
Dual Fuel Range dimensions Dual Fuel Range HR 19xx with Standard Burner Configuration (M Pro Power Plus) HR 1924, HR 1934, HR 1935, HR 1936, HR 1954, HR 1955, HR 1956 If a BTU-reducing kit is necessary, an authorized installer is required to modify the product to meet ANSI Z21. 1 In case of combustible materials, a minimum distance of 6" must be observed on each side in addition to dimension .
Dual Fuel Range dimensions HR 1924 Position Dimensions Min. 30" (762 mm) 6" + + 6" (150 mm + + 150 mm) Description Width of cabinet opening If combustible materials are present, an additional minimum distance of 6" (150 mm) (each side) is required. Ensure that local codes are observed. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface.
Dual Fuel Range dimensions HR 1934 Position Dimensions Min. 36" (914 mm) 6" + + 6" (150 mm + + 150 mm) Description Width of cabinet opening If combustible materials are present, an additional minimum distance of 6" (150 mm) (each side) is required. Ensure that local codes are observed. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface.
Dual Fuel Range dimensions HR 1935, HR 1936 Position Dimensions Min. 36" (914 mm) 6" + + 6" (150 mm + + 150 mm) Description Width of cabinet opening If combustible materials are present, an additional minimum distance of 6" (150 mm) (each side) is required. Ensure that local codes are observed. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface.
Dual Fuel Range dimensions HR 1954, HR 1955, HR 1956 Position Dimensions Min. 48" (1219 mm) Width of cabinet opening 6" + + 6" If combustible materials are present, an additional minimum distance of 6" (150 mm) (each side) is required. Ensure that local codes are observed. (150 mm + + 150 mm) Description 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface.
Dual Fuel Range dimensions Dual Fuel Range HR 192x/193x with BTU-reducing kits (M Pro Power - Zero Gap; M Pro - Décor Hood) HR 1924, HR 1934, HR 1935, HR 1936 For Miele Range Hoods and Miele Range-Décor Hoods: If a BTU-reducing kit is necessary, an authorized installer is required to modify the product to meet ANSI Z21. Jets are a standard accessory and are getting changed during installation, see "Combination Range with BTU-reducing kit".
Dual Fuel Range dimensions HR 1924 Position Dimensions Min. 30" (762 mm) Description Width of cabinet opening Please contact Miele Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 30" (762 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XL blower). Please refer to Miele ventilation hood installation manual.
Dual Fuel Range dimensions HR 1934 Position Dimensions Min. 36" (914 mm) Description Width of cabinet opening Please contact Miele Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 36" (914 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XL blower).
Dual Fuel Range dimensions HR 1935, HR 1936 Position Dimensions Min. 36" (914 mm) Description Width of cabinet opening Please contact Miele Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 30" (762 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XL or DRxB XXL blower).
Dual Fuel Range dimensions Dual Fuel Range HR 195x with BTU-reducing kit (M Pro Power - Zero Gap) HR 1954, HR 1955, HR 1956 For Miele Range Hoods: If a BTU-reducing kit is necessary, an authorized installer is required to modify the product to meet ANSI Z21. Jets are a standard accessory and are getting changed during installation, see "Combination Range with BTU-reducing kit".
Dual Fuel Range dimensions HR 1954, HR 1955, HR 1956 Position Dimensions Min. 48" (1219 mm) Description Width of cabinet opening Please contact Miele Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 36" (914 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XXL blower). Please refer to Miele ventilation hood installation manual.
Dual Fuel Range dimensions Detailed views of HR 1924 Side view of HR 1924 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment 5" - 6 1/2" (127 mm - 165.
Dual Fuel Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1924 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Dual Fuel Range dimensions Front side view of HR 1924 (708 mm) 1/4" 27 (43mm) 1 11/16" 6" ) 3/1 mm 1 " 2m 1/416" / / (-1 .85 (20 " /16 ) 2 9 .2mm (65 17 13/16" (452.2mm) (34mm) (7mm) 8 1/8" (207mm) 1 5/16" m) 2m ) m (69 (x) 35 1/2" - 37" (901.7mm - 939.8mm) (40mm) 1 9/16" 27 7 /8" 22 5 /8" (5 74.6 mm) 29 1 5/16 " (76 0mm ) ( /8" m) 3m 1 (x) = Depending on the appliance height adjustment 5" - 6 1/2" (127 mm - 165.
Dual Fuel Range dimensions 5 7/8" (149mm) Rear view of HR 1924 G 30 5/8" (778.5mm) W E 5 15 /16" (151 .3mm 24 3 /8 " (619 .9mm ) E = Electrical connection W = Water connection G = Gas connection 70 ) 2 15 /16" (75.
Dual Fuel Range dimensions Detailed views of HR 1934 Side view of HR 1934 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.
Dual Fuel Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1934 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Dual Fuel Range dimensions Front side view of HR 1934 34" (8 64,4 mm (45 (40mm) " /16 mm) 13 .85 " 1/4 (43mm) (20 27 -1/16" m) 2m (69 m) m / -2 " /16 ) 2 9 .2mm 17 13/16" (65 (452.2mm) ( (x) 35 1/2" - 37" 1 9/16" 1/4" (7mm) (34mm) 1 5/16" /4" 1 3 mm) 1 11/16" (901.7mm - 939.8mm) 8 1/8" (207mm) (40mm) 1 9/16" ) " 1/8 m) (3m 28 5 /8" (7 27m 35 1 m) 5/16 " (913 mm) (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.
Dual Fuel Range dimensions 6 1/16" (153.8mm) Rear view of HR 1934 W 30 5/8" (778.5mm) G E E = Electrical connection W = Water connection G = Gas connection 74 33 27 3 61 /8" (6 96.1 mm) (158 /4" mm) (94.
Dual Fuel Range dimensions Detailed views of HR 1935 Side view of HR 1935 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.
Dual Fuel Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1935 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Dual Fuel Range dimensions Front side view of HR 1935 34" (8 64.4 mm (45 (40mm) " /16 mm) 13 .85 " 1/4 (43mm) (20 27 -1/16" m) 2m (69 m) m / -2 " /16 ) 2 9 .2mm 17 13/16" (65 (452.2mm) ( (x) 35 1/2" - 37" 1 9/16" 1/4" (7mm) (34mm) 1 5/16" /4" 1 3 mm) 1 11/16" (901.7mm - 939.8mm) 8 1/8" (207mm) (40mm) 1 9/16" ) " 1/8 m) (3m 28 5 /8" (7 27m m) 35 1 5/16 " (913 mm) (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.
Dual Fuel Range dimensions 6 1/16" (153.8mm) Rear view of HR 1935 W 30 5/8" (778.5mm) G E E = Electrical connection W = Water connection G = Gas connection 78 33 27 3 61 /8" (6 96.1 mm) (158 /4" mm) (94.
Dual Fuel Range dimensions Detailed views of HR 1936 Side view of HR 1936 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.
Dual Fuel Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1936 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Dual Fuel Range dimensions Front side view of HR 1936 34" (8 64.4 (45 (40mm) " /16 mm) 13 .85 " 1/4 (43mm) (20 27 -1/16" m) 2m (69 m) m / -2 " /16 ) 2 9 .2mm 17 13/16" (65 (452.2mm) ( (x) 35 1/2" - 37" 1 9/16" 1/4" (7mm) (34mm) 1 5/16" /4" 1 3 mm) 1 11/16" (901.7mm - 939.8mm) 8 1/8" (207mm) (40mm) 1 9/16" mm) " 1/8 m) (3m 28 5 /8" (7 27m m) 35 1 5/16 " (913 mm) (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.
Dual Fuel Range dimensions 6 1/16" (153.8mm) Rear view of HR 1936 W 30 5/8" (778.5mm) G E E = Electrical connection W = Water connection G = Gas connection 82 33 27 3 61 /8" (6 96.1 mm) (158 /4" mm) (94.
Dual Fuel Range dimensions Detailed views of HR 1954 Side view of HR 1954 28 15/16" (734.4mm) 27 1/4" (692mm) 8 1/8" (207mm) (x) 35 1/2 - 37" (901.7 - 939.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 24 15/16" (633mm) 15/16" (24.3mm) 44" (1114mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2" (101.6 mm - 139.
Dual Fuel Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1954 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Dual Fuel Range dimensions Front side view of HR 1954 (115 8.4m m) (34mm) 1 5/16" (4 (40mm) 1 9/16" 8 1/8" (207mm) /4" 1 35mm) 1 11/16" 2 ) mm / (-1 (x) " /16 ) 2 9 5.2mm (6 3 5/8 " (9 2.7m m) 47 1 22 1 5/16 " /4" (121 8mm ) 18 11/16" (473.9mm) 1/4" (7mm) (19 ) ( m /4" / -2m 7 1 16" /4" 3 m) 2m 69 (43mm) (698.9mm) (340.5mm) 27 1/2" 35 1/2 - 37" 13 3/8" (901.7 - 939.8mm) (40mm) 1 9/16" 45 5 /8" (564 .5 mm) 3 5/8 " (92.
Dual Fuel Range dimensions Rear view of HR 1954 E 23 1 40 7 (102 (590 /16" 7.7m m) E = Electrical connection W = Water connection G = Gas connection 86 /4" .7mm ) 3 3/4 (95.7 " mm) (805mm) 31 11/16" 5 9/16" G (140.
Dual Fuel Range dimensions Detailed views of HR 1955 Side view of HR 1955 28 15/16" (734.4mm) 27 1/4" (692mm) 8 1/8" (207mm) (x) 35 1/2 - 37" (901.7 - 939.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 24 15/16" (633mm) 15/16" (24.3mm) 44" (1114mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2" (101.6 mm - 139.
Dual Fuel Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1955 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Dual Fuel Range dimensions Front side view of HR 1955 45 5 /8" (115 8.4m (34mm) 1 5/16" (4 (40mm) 1 9/16" 8 1/8" (207mm) /4" 1 35mm) 1 11/16" 2 ) mm / (-1 (x) " /16 ) 2 9 5.2mm (6 3 5/8 " (9 2.7m m) 47 1 22 1 5/16 " /4" (121 8mm ) 18 11/16" (473.9mm) 1/4" (7mm) (19 ) ( m /4" / -2m 7 1 16" /4" 3 m) 2m 69 (43mm) (698.9mm) (340.5mm) 27 1/2" 35 1/2 - 37" 13 3/8" (901.7 - 939.8mm) (40mm) 1 9/16" m) (564 .5 mm) 3 5/8 " (92.
Dual Fuel Range dimensions Rear view of HR 1955 E 40 7 (102 23 1 /4 /16" 7.7m m E = Electrical connection W = Water connection G = Gas connection 90 ) " (590 .7mm ) 3 3/4 (95.7 " mm) (805mm) 31 11/16" 5 9/16" G (140.
Dual Fuel Range dimensions Detailed views of HR 1956 Side view of HR 1956 28 15/16" (734.4mm) 27 1/4" (692mm) 8 1/8" (207mm) (x) 35 1/2 - 37" (901.7 - 939.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 24 15/16" (633mm) 15/16" (24.3mm) 44" (1114mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2" (101.6 mm - 139.
Dual Fuel Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1956 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Dual Fuel Range dimensions Front side view of HR 1956 /8" (115 8.4m m) (34mm) 1 5/16" (4 (40mm) 1 9/16" 8 1/8" (207mm) /4" 1 35mm) 1 11/16" 2 ) mm / (-1 (x) " /16 ) 2 9 5.2mm (6 3 5/8 " (9 2.7m m) 47 1 5/16 22 1 " /4" (121 8mm ) 18 11/16" (473.9mm) 1/4" (7mm) (19 ) ( m /4" / -2m 7 1 16" /4" 3 m) 2m 69 (43mm) (698.9mm) (340.5mm) 27 1/2" 35 1/2 - 37" 13 3/8" (901.7 - 939.8mm) (40mm) 1 9/16" 45 5 (564 .5 mm) 3 5/8 " (92.
Dual Fuel Range dimensions Rear view of HR 1956 E 40 7 (102 23 1 /4 /16" 7.7m m E = Electrical connection W = Water connection G = Gas connection 94 ) " (590 .7mm ) 3 3/4 (95.7 " mm) (805mm) 31 11/16" 5 9/16" G (140.
Anti-tip device Before installation WARNING Children and adults can tip over the range if has not been secured. This may lead to fatal injuries. Make sure that the anti-tip device is properly installed and locked into place. It should be screwed to the floor or wall and engage with the center of the bottom of the range. You must take care to protect the installed flooring when moving the range. After moving the range, make sure that the anti-tip device locks back into place.
Anti-tip device Checking the installation space Install the anti-tip device on a floor capable of bearing significant weight, such as a concrete floor, concrete wall or timber framing. The surface must be flat and level. If the rear of the range has distance A to the supporting wall due to unevenness or wall covering (e.g., tile level), you must install the anti-tip device to the supporting floor.
Anti-tip device Check the diagrams for the building's supply lines. Make sure that you do not damage any lines when drilling the holes to attach the anti-tip device. Check the position of the electric, gas and water connections (see "Electrical connection," "Gas connection" and "Plumbing"). An overview on the electrical connections for your range can be found in "Notes on installation".
Anti-tip device Included accessories – 1 anti-tip device – 4 screws – 4 plugs 98
Anti-tip device Installation dimensions of locking bolt Installing the range with the anti-tip device X Wear safety shoes and gloves. Measure the installation space for the range close to floor level. Anti-tip device, front view Model The anti-tip device should be installed at the bottom rear of the range at the midpoint of the width.
Anti-tip device 2 1 3 Attaching to the floor 2 1 3 Attaching to the wall a Anti-tip device b Screws c Locking nut Secure the anti-tip device to the floor surface with suitable bearing capacity, either to the floor or wall. using four screws . 100 Screw the locking nut to the bolt, see the "Installation dimensions of locking bolt" table.
Anti-tip device Do not push the range into position before all supply connections have been established. The toe kick cover is attached to the base of the range by magnets. Complete all necessary connections for the range. Read the information in the "Electrical connection", "Gas connection" and "Plumbing" sections. The range can be damaged if it is lifted using the cover, the trim or the door handle. Open the oven door and hold the appliance by the front of the oven interior.
Anti-tip device Use a level to align the range. – Rear adjustment right and left: You will need an open-end wrench (3/8" (10 mm)). – Front adjustment right and left: You will need an open-end wrench (5/8" (16 mm)) for the locknut and an open-end wrench (1/2" (13 mm)) for the adjustable nut. In the range housing, there is an opening for the bolt of the anti-tip device. The opening allows the range to be slid onto the anti-tip device and back to the wall.
Anti-tip device Disconnecting the range from the anti-tip device WARNING Children and adults can tip over the range if has not been secured. This may lead to fatal injuries. If you need to remove the range from its installation space, e.g. for service, you first need to disconnect the appliance from the anti-tip device. Follow the instructions for installation in reverse order.
Electrical connection ATTENTION: During installation, maintenance and repair work, the range must be disconnected from the electrical supply. It is only completely isolated from the electrical supply if the plug fuses have been fully unscrewed (where applicable), the circuit breaker has been tripped or the power cord has been unplugged from the wall outlet. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards.
Electrical connection Electrical connection Type Connecting line NEMA Electrical supply USA Canada HR 1421 Approx. 5' 11" (1.80 m) 14-50 P plug 120/208 V or 120/240 V 50 A 40 A 60 Hz HR 1622 Approx. 5' 11" (1.80 m) 14-50 P plug 120/208 V or 120/240 V 50 A 40 A 60 Hz HR 195x Approx. 5' 11" (1.80 m) 14-50 P plug 120/208 V or 120/240 V 50 A 50 A 60 Hz HR 192x HR 193x Approx. 5' 11" (1.80 m) 14-30 P plug 120/208 V or 120/240 V 30 A 30 A 60 Hz HR 112x HR 113x Approx. 5' 11" (1.
Electrical connection This appliance must be grounded in compliance with all applicable local and national regulations. Installation, repair and maintenance work should only be performed by a Miele authorized service technician in compliance with local regulations and the ANSI National Electrical Code / NFPA 70 in the United States or the Canadian Electrical Code, Part I in Canada (CSA standard C22.1).
Plumbing Notes on connecting to the water supply The appliance must be connected to the water supply by a qualified professional. Disconnect the appliance from the power supply before connecting it to the water line. Turn off the water supply before connecting the water lines for the range. – All devices used for connecting the appliance to the water supply must comply with the current national and local safety regulations in the country in which the range is being installed.
Plumbing Attach the stainless steel hose to the range. Make sure that the stainless steel hose is not kinked or damaged. The stainless steel hose must not be shortened. Remove the cover from the water supply connection at the back of the range. Connecting to the water supply Danger of electric shock! Disconnect the range from the electrical supply before connecting it to the water supply. Check that the gasket is present. Replace, if not, insert before connecting to the water supply.
Gas connection Connection to the gas supply may only be performed by a duly authorized technician. This technician is responsible for proper function at the installation site. In Massachusetts, the gas connection may be performed only by a certified gas installer. The range must be connected with its own shut-off valve. The shut-off valve must be accessible and visible, after the opening of a cabinet door, if necessary.
Gas connection The installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54. The gas pressure may not undershoot or exceed certain values. Make sure that the maximum gas pressure upstream of the gas pressure controller does not amount to more than 1/2 psi (3.5 kPA) for natural and propane gas.
Burner ratings of Standard Burner Configuration Burner ratings for HR 1124 Gas type Simmer burner Power burner Oven top burner Oven bottom burner Total output of Cooktop Maximum total output of Range BTU/hr kW max max Natural gas 12.500 3.70 Propane gas 12.500 3.70 Natural gas 19.500 5.70 Propane gas 19.500 5.70 Natural gas 22.000 6.45 Propane gas 20.150 5.90 Natural gas 23.200 6.79 Propane gas 23.200 6.79 Natural gas 71.000 20.80 Propane gas 71.000 20.
Burner ratings of Standard Burner Configuration Burner ratings for HR 1134 Gas type Simmer burner Power burner Oven top burner Oven bottom burner Total output of Cooktop Maximum total output of Range 112 BTU/hr kW max max Natural gas 12.500 3.70 Propane gas 12.500 3.70 Natural gas 19.500 5.70 Propane gas 19.500 5.70 Natural gas 22.000 6.45 Propane gas 20.150 5.90 Natural gas 25.500 7.47 Propane gas 27.000 7.90 Natural gas 110.000 32.20 Propane gas 110.000 32.
Burner ratings of Standard Burner Configuration Burner ratings for HR 1135 Gas type Simmer burner Power burner Grill Oven top burner Oven bottom burner Total output of Cooktop Maximum total output of Range BTU/hr kW max max Natural gas 12.500 3.70 Propane gas 12.500 3.70 Natural gas 19.500 5.70 Propane gas 19.500 5.70 Natural gas 19.000 5.50 Propane gas 15.500 4.50 Natural gas 22.000 6.45 Propane gas 20.150 5.90 Natural gas 25.500 7.47 Propane gas 27.000 7.
Burner ratings of Standard Burner Configuration Burner ratings for HR 1136 Gas type Simmer burner Power burner Griddle Oven top burner Oven bottom burner Total output of Cooktop Maximum total output of Range BTU/hr kW max max Natural gas 12.500 3.70 Propane gas 12.500 3.70 Natural gas 19.500 5.70 Propane gas 19.500 5.70 Natural gas 13.000 3.80 Propane gas 14.300 4.20 Natural gas 22.000 6.45 Propane gas 20.150 5.90 Natural gas 25.500 7.47 Propane gas 27.000 7.
Burner ratings of Standard Burner Configuration Burner ratings for HR 1934 Gas type Simmer burner Power burner Total output of Cooktop BTU/hr kW max max Natural gas 12.500 3.70 Propane gas 12.500 3.70 Natural gas 19.500 5.70 Propane gas 19.500 5.70 Natural gas 110.000 32.20 Propane gas 110.000 32.20 BTU/hr kW max max Natural gas 12.500 3.70 Propane gas 12.500 3.70 Natural gas 19.500 5.70 Propane gas 19.500 5.70 Natural gas 19.000 5.50 Propane gas 15.500 4.
Burner ratings of Standard Burner Configuration Burner ratings for HR 1936 Gas type Simmer burner Power burner Griddle Total output of Cooktop BTU/hr kW max max Natural gas 12.500 3.70 Propane gas 12.500 3.70 Natural gas 19.500 5.70 Propane gas 19.500 5.70 Natural gas 13.000 3.80 Propane gas 14.300 4.20 Natural gas 84.000 24.60 Propane gas 85.300 25.00 BTU/hr kW max max Natural gas 12.500 3.70 Propane gas 12.500 3.70 Natural gas 19.500 5.70 Propane gas 19.
Burner ratings of Standard Burner Configuration Burner ratings for HR 1955 Gas type Simmer burner Power burner Grill Total output of Cooktop BTU/hr kW max max Natural gas 12.500 3.70 Propane gas 12.500 3.70 Natural gas 19.500 5.70 Propane gas 19.500 5.70 Natural gas 19.000 5.50 Propane gas 15.500 4.50 Natural gas 122.000 35.70 Propane gas 118.500 34.70 BTU/hr kW max max Natural gas 12.500 3.70 Propane gas 12.500 3.70 Natural gas 19.500 5.70 Propane gas 19.
Burner ratings of M Pro Power (Zero Gap) When the BTU-reducing kit (Zero Gap) is used, the burner ratings of the burners change as follows: Gas type Simmer burner Power burner Grill Griddle 118 BTU/hr kW max max Natural gas 10.000 2.93 Propane gas 10.000 2.93 Natural gas 14.700 4.31 Propane gas 14.700 4.31 Natural gas 19.000 5.50 Propane gas 15.500 4.50 Natural gas 13.000 3.80 Propane gas 14.300 4.
Burner ratings of M Pro (Décor Hood) When the BTU-reducing kit (Décor Hood) is used, the burner ratings of the burners change as follows: Gas type Simmer burner Power burner Grill Griddle BTU/hr kW max max Natural gas 10.000 2.93 Propane gas 10.000 2.93 Natural gas 12.200 3.58 Propane gas 12.200 3.58 Natural gas 19.000 5.50 Propane gas 15.500 4.50 Natural gas 13.000 3.80 Propane gas 14.300 4.
Combination Range with BTU-reducing kit If a BTU-reducing kit is necessary, an authorized installer is required to modify the product to meet ANSI Z21. Jets are a standard accessory and are getting changed during installation.
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Old electrical and electronic appliances often still contain valuable materials.
Please have the model and serial number of your appliance available before contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Nationwide Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com Germany Manufacturer Miele & Cie.
All Electric: HR1421; HR1622; All Gas: HR1124; HR1134; HR1135; HR1136; Dual Fuel: HR1924; HR1934; HR1935; HR1936; HR1954; HR1955; HR1956 en-US, CA M.-Nr.
