Operating/Installation Instructions

Before using for the first time
26
Signing off the remote control
Press the delayed shutdown
control on the ventilation hood
for approx. 10seconds until 1 lights
up.
Then press in order:
the control,
then the control,
then the lighting control,
then the control to sign off.
2 will light up constantly, 3 will flash on
and off.
After a few seconds, 2 and 3 will start
flashing on and off.
Confirm the signing off procedure on
the ventilation hood by pressing the
delayed shutdown control. All the
indicator lights will go out.
Press theand controls on the
remote control at the same time for
about 5seconds until the LED on the
remote control starts flashing.
Then press in turn:
the lighting control,
then the control to sign off.
The remote control LED flashes
steadily.
After approx. 10seconds, the remote
control LED flashes on and off twice
with a longer gap between the flashes.
The LED will go out after a short while.
The remote control is signed off.
Signing on the remote control
Press the delayed shutdown
control on the ventilation hood
for approx. 10seconds until 1 lights
up.
Then press in order:
the control,
then the control,
then the lighting control,
then press the control to sign on.
2 will light up constantly, 3 will flash on
and off.
After a few seconds, 2 and 3 will light
up constantly, B will flash on and off.
Press theand controls on the
remote control at the same time for
about 5seconds until the LED on the
remote control starts flashing.
Then press in turn:
the lighting control,
then press the control to sign on.
The search for a wireless connection
will start. The remote control LED
flashes steadily.
After approx. 30seconds, the remote
control LED flashes on and off four
times with short intervals between the
flashes. The LED will go out after a
short while.
Wait until B on the ventilation hood has
gone out and 2 and 3 are lit up
constantly. The wireless connection has
now been established.