CVA6800_COFFEE%20SYSTEM%20MANUAL
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 5
- Guide to the coffee system 10
- Accessories 12
- Operation 13
- First steps to use 17
- Filling the water tank 20
- Filling the coffee bean container 21
- Turning the coffee machine on and off 22
- Dispenser adjustment 23
- Preparing beverages 24
- Espresso, Coffee or Lungo coffee 24
- Preparing two portions 24
- Canceling preparation 25
- Preparing multiple cups of coffee, one directly after another ( Coffee pot ² ) 25
- Preparing coffee drinks from ground coffee 25
- Beverages with milk 27
- Preparing hot water 28
- Preparing drinks using a profile 28
- After preparing drinks 28
- Customizing your coffee 29
- Setting the serving size 32
- Resetting drinks 34
- Profiles 35
- MyMiele 38
- Settings 39
- Accessing the "Settings" menu 39
- Changing and saving settings 39
- Overview of the Setting options 40
- Language 42
- Time 42
- Clock type 42
- Time of day 42
- Date 42
- Timers 43
- Eco mode 44
- Lighting 45
- Starting screen 45
- Info (displaying information) 45
- Locking the coffee system ( System lock 0 ) 45
- Water hardness 46
- Brightness 46
- Volume 46
- Adjusting the dispensers 46
- Factory default settings 46
- Showroom program (demo mode) 46
- Descaling 62
- Frequently asked questions 64
- Cleaning clogged milk pipework 73
- After sales service 76
- Installation instructions 77
- Caring for the environment 78
- Electrical connection 79
- Installation 80
- RemoteVision (optional accessory) 85
- Copyright and licenses 86
- Contact details 87
Unsatisfactory results
Problem Possible cause and solution
The consistency of
the milk froth is
unsatisfactory.
The milk temperature is too high. Good milk froth can only
be prepared with cold milk (< 55°F/13°C).
^
Check the milk temperature in the milk container.
The milk pipework or the air intake hose is clogged.
^
Follow the instructions in chapter "Cleaning clogged milk
pipework".
The grinding of the
coffee beans
sounds louder
than usual.
The coffee bean container has run empty during the
grinding process.
^ Fill the coffee bean container with fresh beans.
There might be stones mixed in with the coffee beans.
^ Turn the coffee system off immediately. Contact Miele
Technical Service.
Espresso or coffee
flows into the cup
too quickly.
The grind level is too coarse.
^ Set the grinder control to a finer setting (see "Adjusting the
grinder setting").
Espresso or coffee
flows into the cup
too slowly.
The grind level is too fine.
^
Set the grinder control to a coarser setting (see "Adjusting
the grinder setting").
The coffee or
espresso is not hot
enough.
The cup has not been pre-heated.
The brewing temperature is set too low.
^
Set a higher brewing temperature (see "Brewing
temperature").
The brew unit filters are blocked.
^
Remove the brew unit and clean it by hand (see "Brew
unit" ).
^
Degrease the brew unit (see "Brew unit").
Frequently asked questions
71