Fully Integrated 30” MasterCool All Refrigerator: K 2801 Vi / K 2811 Vi All Freezer: F 2801 Vi / F 2811 Vi Bottom Mount: KF 2801 Vi / KF 2811 Vi Shown: F 2471 Vi merged with K 2801 Vi Please note: This information is subject to change 8mieleusa.
Fully Integrated 30” MasterCool SPECIFICATIONS Overall Unit Dimensions 293/4” (756 mm) W x 833/4”- 853/16” (2127 - 2164 mm) H x 24” (610 mm) D [Depth does not include door panel] Niche 30” (762 mm) W* x 84” - 853/16” (2134 - 2164 mm) H x 243/4” (629 mm) D Minimum Cabinet Niche Opening Electrical K 28x1 Vi Electrical Requirements F 28x1 Vi KF 28x1 Vi 110V / 120V, 60Hz, 15 Amps In the case of side-by-side installations, a separate outlet must be used for each appliance.
Fully Integrated 30” MasterCool CUTOUT DIMENSIONS • Niche depth assumes a 3/4” (19 mm) panel, please adjust according to custom panel thickness CUTOUT DETAILS • The electrical connection must not be positioned higher than 9” (228.6 mm) above the floor. • The 1/4” (6.4 mm) plumbed water connection should not be positioned higher than 2” (50.8 mm) above the floor. Notes: In case of an emergency the electrical outlet must be easily accessible and must not be concealed behind the appliance.
Fully Integrated 30” MasterCool POWER SUPPLY AND WATER CONNECTION (Water Connection For F 28x1 Vi & KF 28x1 Vi Only) Rear View Front View Water connection is located in front of unit. 1/4” compression fitting is needed. Electrical - 5 foot (1.
Fully Integrated 30” MasterCool | K 28x1 Vi & F 28x1 Vi CUSTOM PANEL INSTALLATIONS These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding cabinets.
Fully Integrated 30” MasterCool | K 28x1 Vi & F 28x1 Vi DOOR PANEL DIMENSIONS KFP 3004 - Door Panel Available as an accessory for the following models: • K 28x1 Vi • F 28x1 Vi Page 6 of 10
Fully Integrated 30” MasterCool | KF 28x1 Vi CUSTOM PANEL INSTALLATIONS These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by the cabinet a uniquewith panel integration which allowsto the panels align with surrounding These unitsmaker. do notMiele comehas equipped a front panel.system They are designed accept a to custom doorthe panel supplied by cabinets. the cabinet maker.
Fully Integrated 30” MasterCool | KF 28x1 Vi DOOR PANEL DIMENSIONS KFP 3014 - Top Panel KFP 3024 - Bottom Panel Available as an accessory for the following model: • KF 28x1 Vi Page 8 of 10
Fully Integrated 30” 1MasterCool 15° Door HINGING ThDETAILS ickne115° ssOPENING options 0-1/8" Available for the following models: • K 28x1 Vi • F 28x1 Vi • KF 28x1 Vi 0-1/8” (3 mm) 0-3/4” (19 mm) 0-3/4" 1” (25 mm) 1" 1-1/4” (32 mm) 1-1/4" 1-1/2” (38 mm) 1-1/2" 1-3/4” (44 mm) 1-3/4" 90° Door 115° Door Thickness options 0-3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2-5/8” (67mm) 2-1/3” (59mm) 2-1/24”(52mm) Cabinet Front binet Front 0-3 /4” mm ) 3”(76.2mm) 1-3/4”(44.
Fully Integrated 90MasterCool ° Door 30” Thickness options Thickness HINGING DETAILS 90° OPENING 0-1/8” (3 mm) 1-3/16” (30mm) 1-7/16” (36.5mm) Thickness options 115° Door 0-1/8" Thickness options1-11/16” (43mm) 115° Door 1-1/2" 1-3/4" 0-3/4” (19 mm) 0-3/4" 1” (25 mm) 1" 1-1/4” (32 mm) 1-1/4" 1-1/2” (38 mm) 1-1/2" 1-3/4” (44 mm) 1-3/4" 2” (51 mm) 2" 90° Do7/16” r (11omm) Thickness options 90° Door 0-1/8" Available for the following models: • K 28x1 Vi • KF 28x1 Vi 1-15/16” (49.
