32” Built-In Ventilation Hood DA 2588 Shown: DA 2588 over KM 3464 Please note: This information is subject to change 8mieleusa.
32” Built-In Ventilation Hood SPECIFICATIONS Overall Unit Dimensions 319/16” (802 mm) W x 127/8” (326 mm) H x 1513/16” (402 mm) D Built-In Minimum Opening Dimensions 305/16” (770 mm) W x 149/16” (370 mm) D Minimum Opening Thickness 5 Maximum Opening Thickness /8” (16 mm) 13/8” (35 mm) Fan Fan Speeds Maximum CFM 4 625 CFM, (Reducing Collar is available to reduce Air flow to less than 400 CFM) Duct Recommended Duct Diameter 6” (150 mm) Electrical Electrical Requirements Power Cord 120V, 60Hz,15
2” Built-In Ventilation Hood INSTALLATION SPECIFICATIONS Product Dimensions Front View Side View Top View Niche/Cutout Dimensions Drawings are not to scale Page 3 of 4
32” Built-In Ventilation Hood INSTALLATION SPECIFICATIONS Distance Between Cooktop and Ventilation Hood (S) Page 4 of 4 Specification Sheets TRS 10082018
Recirculation Kit DUU 150 (Optional Accessory) DA 2510 Page 6 of 8
Recirculation Kit DUU 151 (Optional Accessory) DA 2510 Page 7 of 8
Reducing Collar (Optional Accessory) If you would like to reduce the enviromental impact of your ventilation system by limiting the CFM output the Reducing Collar can be installed. It reduces the air flow to less than 400 CFM. Check local building codes for maximum CFM requirements.
