Specs

NOTE: Drawing is not to scale.

SPECIFICATION SHEETS 010405

Product Dimensions

Decorator Wall Hood

DA249-4

35 7/16"

19 11/16"

20 9/16" - 30 7/16"

See Notes

12 1/2"

8 1/2"

11 1/4"

11 1/16"

Front Perspective

110 Volt - 15 Amp 3-wire power

supply connects through top or rear

of chimney.

Standard 110 Volt Outlet

Notes

• All installations must be done in

accordance with local codes.

• Recirculation: 25 5/16" - 34 3/8"

• 6" duct connects to blower system inside

chimney.

Location Codes

E -

O -

PAGE 1
Product Dimensions Decorator Wall Hood DA249-4 E O 16" 11 1/ 11 1/ 4" 12 1/2" Front Perspective 20 9/16" - 30 7/16" See Notes 8 1/2 " 16" 35 7/ 19 11 /16" Location Codes E - 110 Volt - 15 Amp 3-wire power supply connects through top or rear of chimney. O - Standard 110 Volt Outlet Notes • All installations must be done in accordance with local codes. • Recirculation: 25 5/16" - 34 3/8" • 6" duct connects to blower system inside chimney. NOTE: Drawing is not to scale.
PAGE 2
Installation Dimensions Decorator Wall Hoods DA249-4 Ceiling Line 13 3/8" Structural member S + 9 7/8" Area must be reinforced with a minimum of 1/2" plywood backing Center Line Notes • Center unit over cooking surface • Distance "S" is determined by the cooking surface. Minimum distance "S" is: - 18" for electric surfaces - 26" for gas surfaces • Area behind mounting plates MUST be reinforced using a minimum of 1/2" plywood.