Manualshelf

Specs

ManualsBrandsMiele ManualsRetired Models36" DA 5196 W Wall Hood
123
PRODUCT VIEW
DA 5196 W
Page 3 of 3
Wall Ventilation Hood
DA 5196 W
FOREVER BETTER
PLEASE NOTE: The majority of the weight of the installed ventilation system will be supported
by the lower retaining plate. It must be rmly attached to the stud framing behind the drywall.
If studs are not available in the required locations, a plywood backing (min. ½” (13 mm) thick)
spanning at least two studs must be installed. Failure to adequately support the weight as
stated may result in the ventilation system falling off the wall, causing personal injury and
property damage.