Operating/Installation Instructions
Building in the appliance
91
Pre-drill fixing holes in the cabinet
door and fasten the screws. Make
sure both metal edges are flush
(//symbol).
Close the appliance door and the
cabinet door.
- Adjusting the depth (Z)
Loosen the screws at the top of
the appliance door, and loosen the
hexagon-headed screw at the bot-
tom of the fixing bracket. By moving
the cabinet door, create a gap of
1/16" (2mm) between the cabinet
door and the housing unit.
Tighten all the screws again.
Replace the upper cover and click
it into place.
Push up the side covers so that
they audibly click into place.