KFN9855iDE Specifications Sheet

KFN 9855 iDE
Page 2 of 7
SPECIFICATIONS
Overall Unit Dimensions 29
7
/8” (759 mm) W x 79
13
/16” (2,027 mm) H x 24” (610 mm) D
Niche
Minimum Niche Opening Dimensions
30 ” (762 mm) W x 80” (2,032 mm) H x 24” (610 mm) D
Interior Volume
Fresh Food Volume 9.8 cu-ft (277.5 L)
Freezer Volume 4.3 cu-ft (127 L)
Plumbing
Water Supply Requirements
Connect to a cold water supply only. Must be connected to a shut-off valve. The water shut-off valve must
be accessible after installation. The water pressure must be between 22 psi (1.5 bar) and may not exceed
87 psi (6 bar). If the pressure is higher than 87 psi (6 bar), a pressure reducing valve must be installed.
Water Connection Line
Unit comes with a male 3/4” BPT connection on back of unit. The connection parts included with the
appliance permit the connection of various water lines (included 1/4” compression fitting).
Water line is not included.
Electrical
Electrical Requirements - Volts/Amps
110V / 120V, 60Hz, 15A (single)
110V / 120V, 60Hz, 20A (2 Individual units installed side-by-side, using a Duplex outlet)
Power Cord - Plug NEMA 5-15 plug, 6’ 6” (2 m)
Custom Panel - Refer to manual for further detail
Maximum Refrigerator Door Panel Weight 60 lbs (27 kg)
Maximum Freezer Door Panel Weight Each 26.5 lbs (12 kg)
Maximum Panel Thickness 3/4” (19 mm)
Minimum Panel Thickness 5/8” (16 mm)
Shipping
Shipping Weight 345 lbs (156.5 kg)
Shipping Dimension 32
5
/16” W x 82
11
/16” H x 29
1
/8” D
Support
Call Miele [phone]
Miele Website
8www.mieleusa.com
20/20 Link
82020technologies.com
30” Bottom Mount Refrigerator
KFN 9855 iDE
KFN 9855 iDE LI (Left Hinged)
Item 38985552CDN
KFN 9855 iDE RE (Right Hinged)
Item 38985551CDN
Hinging is not eld reversible.