KFN9855iDE Specifications Sheet

Inset Installation Panel
Dimensions
KFN 9855 iDE
Page 5 of 7
30” Bottom Mount Refrigerator
KFN 9855 iDE
STAINLESS STEEL PANELS
Item#
Top Panel 38996045CDN
Bottom Panels 38996046CDN
Please note following:
-Stainless steel panels are not pre-drilled
-Handles are sold separately
Please take into account the followiong information concerning the cabinet front:
- The Panels should be at least 5/8” (16 mm) thick to allow the connecting rails to be fastened to them.
- The maximum panel thickness is 3/4” (19 mm).
- The refrigerator panel weight must not exceed 60 lbs (27 kg).
- Each freezer panel weight must not exceed 26.5 lbs (12 kg)
Stainless steel panels are available as
an optional Accessory