Operating and Instalaltion Instructions

C Select a programme
^
Switch the dryer on by pressing the
On/Off K button in.
Programme chart
–
See separate booklet
"Commissioning, Programme chart
and Settings".
You can select a programme either by:
1. Using the appropriate short cut
button to select one of the four
programmes listed in the display
("favourites"), or
2. Selecting a programme from the
Programme selection menu (turn A
and press B).
Select
Low temperature or Timer,if
required
^
Select Low temperature and/or the
Timer (Delay start time) from the
relevant sub-menu.
Payment system
If your machine is connected to a
payment system, the amount of credit
required will appear in the display.
Credit may be lost if, after the
programme has started, the door is
opened or the programme cancelled
(depending on how the tumble dryer
was set up).
D Start the programme
The Start button will flash as soon as a
programme can be started.
^ Press the Start button.
The Start button will now light up.
– Programme running will appear in
the display, followed by Drying and
the programme duration.
– With sensor drying programmes, e.g.
Machine iron ... Hand iron...
etc. will appear in the display later
on.
Once drying is in progress, you can
press one of the short cut buttons:
–
Button
E Timer to call up the
estimated end time of the
programme and the current time of
day.
–
Button
F Save to save the current
programme as a favourite.
–
Button
G Cancel cancels the
current programme.
Short drying instructions
45