Specs

ManualsBrandsMiele ManualsDomestic Appliances52713602USA

Installationsplan / Installation plan

Installatietekening

Plan d`installation

Piano di installazione

Plano de instalación

Plano de instalação

Σχέδιο εγκατάστασης

Asennusohje

Installasjonsplan

Installationsplan

PT 7136 / PT 5136 EL

Materialnummer / Mat. no.: 06 664 260

Änderungsstand / Version: 02

Datum Zeichnung / Drawing date: 25.04.2005

Datum Legende / Legend date: 15.11.2007

Summary of content (11 pages)

PAGE 1
Installationsplan / Installation plan Installatietekening Plano de instalación Plan d`installation Plano de instalação Piano di installazione Σχέδιο εγκατάστασης Asennusohje Installasjonsplan Installationsplan G PT 7136 / PT 5136 EL Materialnummer Änderungsstand Datum Zeichnung Datum Legende / / / / Mat. no.: Version: Drawing date: Legend date: 06 664 260 02 25.04.2005 15.11.
PAGE 2
PAGE 3
PAGE 4
PAGE 5
PAGE 6
PAGE 7
PAGE 8
Technical datasheet PT 7136 / PT 5136 Electric (EL) Tumble dryers: Heating: Legend: Circled, bold-type abbreviations: Connection required G Abbreviations surrounded by broken circle: Connection optional or required, depending on model Optional extras: mm mm mm 300 609 622 mm mm mm mm 300 100 600 650 1. Standard voltage (as supplied) Frequency Rated load Fuse rating Connection cable, min. cross-section Length of supply lead (H05 RN-F without plug) (supplied) V Hz kW A mm² mm 3N AC 400 50 6.
PAGE 9
3. Standard voltage (as supplied) Frequency Rated load Fuse rating Connection cable, min. cross-section Length of supply lead (H05 RN-F without plug) (supplied) V Hz kW A mm² mm 3 AC 230 50 6.4 3 × 16 4 × 1.5 2000 W 4. Standard voltage (as supplied) Frequency Rated load Fuse rating Connection cable, min. cross-section Length of supply lead (H05 RN-F without plug) (supplied) V Hz kW A mm² mm 1N AC 230-240 50 5.52 – 6.0 1 × 25 3 × 2.5 2000 5.
PAGE 10
Plug and socket connection in accordance with IEC 60309 recommended to facilitate electrical safety tests. Install mains isolator according to IEC 60947 on hard-wired connection. Wall socket or mains isolator must be accessible after installation. The use of an earth leakage circuit breaker (ELCB) is strongly recommended. If necessary, equipotential bonding with good galvanic contact must be provided in accordance with all appropriate national and local regulations.
PAGE 11
Possible extensions Machine data The following extensions are possible: Installation of payment system Installation as washer-dryer stack Connection to serial interface, RS 232 Width Depth Height Knocked-down dimensions (W × H) Recommended rear wall gap (measured to front of machine) Net weight Dynamic floor load, max.