Installation Plan Tumble dryer PT 8507 EL (Electrically heated) en – US 37.15 M.-Nr.
U.S.A. Miele, Inc. National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-991-9380 Fax: 609-419-4241 www.mieleusa.com Technical Service & Support Nationwide Phone: 800-991-9380 Fax: 800-220-1348 proservice@mieleusa.com It is essential to read the operating and installation instructions before installing, commissioning or using the machine. This avoids the risk of accidents or damage. All rights reserved M.-Nr.
Technical datasheet Tumble dryer: Heating: PT 8507 Electric (EL) Legend: en - US Abbreviations in bold type: Connection required Abbreviations in circle with dashes: Connection optional or required depending on model version Optional extras: BS Concrete base Quality and density of concrete must comply with load.
Equipotential bonding Connection with male thread Connection with washers and nut 3/8" x 1 3/8" 3/8" 10 mm x 35 mm M 10 Accessories not included. If necessary, equipotential bonding with good galvanic contact must be provided in accordance with all appropriate national and local regulations. Peak load energy management Control contact voltage Connection cable, min. cross-section AC 230V 5 x AWG 14 5 x 1.5 mm Connection cable to be ordered separately.
Machine data Machine width Machine depth Machine height Casing width Casing depth Minimum width of delivery access to installation site Recommended rear wall gap (measured to front of machine) Min. wall gap (to rear edge of lid) Net weight Dynamic floor load, max.