Building Instructions

Technical Information
25
C
VA
6
1
0
C
offee
Sy
stem
4.10 Grinder Assembly
Refer to figure 4-12.
 The grinding grade depends on the gap between the Grinding
Cone (Item 1) and the Grinding Ring (Item 2).
 The gap is set via the Adjustment Lever, (Item 5) on the
Adjustment Ring (Item 3). The smaller the gap, the finer the
grind of coffee will be.
Figure 4-12: Grinder Assembly
Warning!
To avoid binding the grinder, adjustments should be made in small
steps.
1 Grinding cone
2 Grinding ring
3 Adjustment ring
4 Intake worm gear
5 Adjustment lever
6 Handle