Operating and Installation Instructions Range Wall / Insert Hood To prevent accidents and damage to the appliance, you must read these instructions before installing the appliance and using it for the first time. en-US M.-Nr.
Contents Caring for the environment .................................................................................. 3 IMPORTANT SAFETY INSTRUCTIONS ................................................................ 4 Guide to the appliance ........................................................................................ 12 Description of functions ..................................................................................... 14 Appliance combinations...........................................
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Electrical and electronic appliances contain valuable materials.
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS This appliance complies with current safety requirements. Improper use of the appliance can lead to personal injury and material damage. Read all instructions before installing or using the appliance for the first time. Only use the appliance for its intended purpose. Keep these operating instructions in a safe place and pass them on to any future user. Appropriate use CAUTION: For General Ventilating Use Only.
IMPORTANT SAFETY INSTRUCTIONS Safety with children As with any appliance, close supervision is necessary when used by children. Please supervise children in the vicinity of the hood and do not let them play with it. Danger of suffocation! Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
IMPORTANT SAFETY INSTRUCTIONS To avoid damaging the ventilation hood, make sure that the connection data (voltage and frequency) on the data plate correspond to the building's power supply before connecting the appliance. If in doubt, consult a qualified electrician. Do not use a power bar or extension cord to connect the ventilation hood to electricity. These are a fire hazard and do not guarantee the required level of appliance safety.
IMPORTANT SAFETY INSTRUCTIONS – The screw-type fuses on the electrical service panel have been removed. – The power cord (if present) has been unplugged from the socket (pull the plug not the cord). Correct use WARNING: TO REDUCE THE RISK OF A COOKTOP GREASE FIRE: – a) Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers may ignite. Heat oils slowly on low or medium settings. – b) Always turn the hood on when cooking at a high heat.
IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A COOKTOP GREASE FIRE, OBSERVE THE FOLLOWING*: – a) SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT. – b) NEVER PICK UP A FLAMING PAN - You may be burned. – c) DO NOT USE WATER, including wet dishcloths or towels - a violent steam explosion will result.
IMPORTANT SAFETY INSTRUCTIONS Overheated oil and fat can ignite, causing fire damage to the ventilation system. Do not leave cookware, pans, and deep fryers unattended when cooking with oil or fat. Similarly, never leave an open grill unattended when grilling. Fat and debris deposits impair the proper functioning of the ventilation hood. To ensure that cooking vapors are properly cleaned, never use the ventilation hood without the grease filters in place.
IMPORTANT SAFETY INSTRUCTIONS Proper installation WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: – a) Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction. – b) Sufficient air is needed for combustion and exhausting of gases through the flue (chimney of fuel burning equipment to prevent back drafting.
IMPORTANT SAFETY INSTRUCTIONS Be sure to observe the information contained in the “Installation” section when mounting the ventilation hood. Metal parts can have sharp edges which may cause injury. Wear gloves to protect your hands from being cut. When installing the exhaust duct, only use pipes or tubes made of non-flammable material. These can be obtained from your Miele dealer or from Miele Technical Service.
Guide to the appliance 12
Guide to the appliance a Duct cover Optional accessories DRDC in various heights. Cover will vary depending on model. b Recirculation vents Only in recirculation mode with conversion kit DRUU, optional accessory c Canopy d OdorFree Charcoal Filter Optional accessories for recirculation mode. The charcoal filters are mounted to the rear panel of the baffle filter.
Description of functions The following functions are available on your ventilation hood, depending on the model: Recirculating mode (with conversion kit DRUU) Vented mode with internal blower DRIB A blower mounted in the ventilation hood draws in the air. The air is cleaned by the baffle filter and conveyed out of of the building. Vented mode with external blower DREB The exhaust blower is mounted outside the room in a location of your choice.
Description of functions Appliance combinations The following appliance combinations are possible: Vented mode with internal blower Vented mode with external blower Recirculating mode Duct cover Range Insert DAR 1120 (30") Blower DRIB XL or DRIB XXL* Blower DREB XL or DREB XXL* - - Range Insert DAR 1130 (36") Blower DRIB XL or DRIB XXL Blower DREB XL or DREB XXL - - Range Insert DAR 1150 (48") Blower DRIB XXL Blower DREB XXL - - Range Wall Hood DAR 1220 (30") Blower DRIB XL or DRIB XXL*
Operation Switch on the blower Power levels 1 to 3 are available for light to heavy cooking vapors and odors. If heavy cooking vapors and odors occur temporarily, e.g., during frying, select stage B as booster level. Use the blower switch to turn on the blower and select the appropriate power level. Cooking at a high setting causes very high temperatures at the ventilation hood. Excessive temperatures may damage the ventilation hood. Always switch on the ventilation hood when using the cooktop.
Operation Turning off the blower It is advisable to run the blower for a few minutes after cooking has finished to neutralize any lingering vapors and odors in the air. To turn the blower off, turn the blower switch to 0. Turning the overhead lighting on/off The overhead lighting can be turned on and off independently from the blower. Use the light switch to turn the overhead lighting on (1) and off (0).
Energy-saving tips This hood operates in a very efficient and energy-saving manner. The following will help you to save even more energy when using it: – Ensure that there is sufficient ventilation in the kitchen when cooking. If there is insufficient air flow during vented mode, the hood cannot operate efficiently, causing increased operating noise levels. – Always cook with the lowest possible setting.
Cleaning and care WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Before cleaning or servicing the hood, disconnect it from the power supply, see “IMPORTANT SAFETY INSTRUCTIONS”. Stainless steel housing General information The surfaces and control buttons are susceptible to scratching and chipping. Observe the following cleaning instructions. Clean all surfaces and control buttons using warm water and liquid dish soap. Apply with a sponge cloth.
Cleaning and care Baffle filter The reusable stainless steel baffle grease filters in the appliance absorb the solid particles of kitchen vapors (grease, dust, etc.) and prevent soiling of the ventilation hood Risk of fire! Removing the baffle filter When handling the grease filter, be careful not to drop it. This can result in damage to the filter and the cooktop below. Make sure you hold the filter securely at all times when handling it. Oversaturated grease filters are a fire hazard.
Cleaning and care Cleaning the baffle filters by hand After cleaning Use a sponge with a solution of warm water and liquid dish soap. Do not use concentrated dish soaps. After cleaning, leave the baffle filters on an absorbent surface to dry. Unsuitable cleaning agents Unsuitable cleaners can cause damage to the filter surfaces if used regularly.
Cleaning and care Reinsert the baffle filters by pushing the filter upwards then pushing it in .
Cleaning and care OdorFree Charcoal Filter The following ventilation hoods can be prepared for recirculation mode with the specified conversion kit: DAR 1220: conversion kit DRUU 30 DAR 1230: conversion kit DRUU 36 For recirculation mode, the baffle filters are fitted with a charcoal filter which traps odors during cooking. The charcoal filters are installed on the back side of the baffle filters. You can purchase the OdorFree Charcoal Filter from Miele.
Service and warranty For faults that you cannot resolve on your own, please contact your Miele dealer or Miele Technical Service. MieleCare The telephone number for Miele is listed at the back of these instructions. MieleCare, our Extended Service Contract program, gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership.
Installation Before installation Before installing the appliance, read all of the information contained in this chapter and also in the “IMPORTANT SAFETY INSTRUCTIONS” section. Installation Instructions Please refer to the accompanying installation sheet for instructions on how to install the appliance. Removing the protective film The housing components are covered by a protective film to prevent them from damage during transport. Please remove this film before installing the housing components.
Installation Installation parts 26
Installation a 1 vent collar for exhaust duct 9 3/4" (250 mm). The vent collar is not used for recirculation mode. b 1 mounting rail for mounting the DAR 12xx on a wall c 2 mounting brackets for mounting the DAR 12xx on a wall 2 self-locking screws, M6 x 16 mm for attaching the DAR 12xx to the mounting rail. 4 screws, M4 x 11 mm with base and d 2 cover caps 3 screws, 5 x 60 mm and 2 clamps for securing the DRDC and DRUU duct Covers (DAR 12xx only).
Installation Appliance dimensions Range Insert Hood DAR 1120, DAR 1130, DAR 1150 28
Installation Cabinet dimensions for DAR 1120, 1130, 1150 (example) 29
Installation Range Wall Hoods DAR 1220, 1230, 1250, 1260 30
Installation DRDC duct covers, DRUU recirculation conversion kits a Minimum height required for exhaust air penetration when using a vent duct. b Recommended installation area for the electrical connection. c Attachment points: there must be a sub-construction capable of bearing the load in the area of the attachment point. d The vent collar is not used for recirculation mode.
Installation Distance between cooktop and ventilation hood (S) Miele ventilation hood DAR 1120, DAR 1220 (30") Internal/external Miele blower DRIB/DREB XL (700 cfm) DAR 1130, DAR 1230 (36") DRIB/DREB XL (700 cfm) DRIB/DREB XXL (1100 cfm) Miele electric/induction cooktops 24" (610 mm) Miele barbeque and fryer (electric) 26" (660 mm) Multi-burner Miele gas cooktop, ≤ 43,000 BTU/h (12.6 kW), none of the burners > 19,800 BTU/h (5.
Installation BTU-reducing kit (M Pro Power, M Pro) If the BTU-reducing kit for Miele Ranges/Rangetops is in use, the distance between Range Wall/Insert Hood and Range/Rangetop can get reduced. Please observe the conversion instructions for the jet kits as well as the operating and installation instruction for the Range/Rangetop. To identify the S distance please use table on previous page.
Installation Plywood backing The majority of the weight of the installed ventilation system will be supported by the lower retaining plate. It must be firmly attached to the stud framing behind the drywall. If studs are not available in the required locations, a plywood backing (min. ½" (13 mm) thick) spanning at least two studs must be installed. Failure to adequately support the weight as stated may result in the ventilation system falling off the wall, causing personal injury and property damage.
Air venting WARNING: Danger of toxic fumes. Gas cooking appliances release carbon monoxide that can be harmful or fatal if inhaled. To reduce the risk of fire and to properly exhaust air, the exhaust gases extracted by the hood should be vented outside of the building only. Do not vent exhaust air into spaces within walls or ceilings or in attics, crawl spaces or garages. To reduce the risk of fire, only use metal ductwork.
Air venting When duct is horizontal it must be laid to slope away at at least ¹/₈ inch per foot. This is to ensure that condensate cannot drain back into the appliance. If the exhaust duct is to be routed through rooms, ceiling space etc., the temperatures in these different areas may differ greatly, which means that the problem of condensation will need to be addressed. The exhaust duct will need to be insulated. Installation of a non-return flap in the exhaust duct is recommended.
Electrical connection WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: All electrical work should be performed by a qualified electrician in strict accordance with national regulations (for USA: ANSI-NFPA 70) and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous. Ensure that power to the appliance is OFF while installation or repair work is performed.
Technical data Total connected load DAR 1120, 1220 with blower DRIB XL or DREB XL 621 W DAR 1130, 1230 with blower DRIB XL or DREB XL 624 W DAR 1130, 1230 with blower DRIB XXL or DREB XXL 809 W DAR 1150, 1250, 1260 with blower DRIB XXL or DREB XXL 812 W Overhead lighting DAR 1120, 1220 2x3W DAR 1130, 1230 3x3W DAR 1150, 1250, 1260 4x3W Supply voltage, frequency Fuse rating Power cord length 120 V AC, 60 Hz 15 A 2.5 ft (0.75 m) Weight DAR 1120 (without blower) 35.2 lbs (16.
Please have the model and serial number of your appliance available when contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com International Headquarters Miele & Cie.
DAR 1120, DAR 1130, DAR 1150 DAR 1220, DAR 1230, DAR 1250, DAR 1260 en-US M.-Nr.
