Installation Instruction
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Adjusting the interior fittings (refrigerator section)
- Freezing and storing food
- Making ice cubes
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Water connection
- Electrical connection
- Installation
- Changing the door hinges
- Removing the door handles
- Removing the upper soft-close mechanism
- Removing the upper appliance door
- Removing the lower soft-close mechanism
- Removing the lower appliance door
- Refitting the lower appliance door
- Inserting the lower soft-close mechanism
- Refitting the upper appliance door
- Inserting the upper soft-close mechanism
- Refitting the handle
- Aligning the machine doors
Cleaning and care
53
Replacing the carbon filters
Replace the carbon filters in the holder
around every 6months.
Replacement KKF-RF carbon filters
can be obtained from the Miele Tech-
nical Service, from your dealer, or from
Miele's website.
Tip: The carbon filter holder is dish-
washer safe.
Pull the carbon filter holder upward to
remove it from the adjustable shelf.
When in position, the carbon filters
must not touch the back wall of the
machine, as the moisture could
cause them to stick to it.
Insert the new carbon filters deep
enough in the holder to ensure that
they do not protrude over the edge
of the holder.
Remove both carbon filters and place
the new filters with the surrounding
edge pointing downward in the
holder.
Place the holder in the middle of the
raised edge at the back of any of the
adjustable shelves, so that it clicks
into position.