Installation Instruction
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Adjusting the interior fittings (refrigerator section)
- Freezing and storing food
- Making ice cubes
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Water connection
- Electrical connection
- Installation
- Changing the door hinges
- Removing the door handles
- Removing the upper soft-close mechanism
- Removing the upper appliance door
- Removing the lower soft-close mechanism
- Removing the lower appliance door
- Refitting the lower appliance door
- Inserting the lower soft-close mechanism
- Refitting the upper appliance door
- Inserting the upper soft-close mechanism
- Refitting the handle
- Aligning the machine doors
Changing the door hinges
79
Removing the upper soft-close
mechanism
Open the upper machine door.
If the door seal is damaged, the
machine door may not close properly
and cooling performance will be re-
duced.
Condensation will form in the inside
and this can cause a build-up of ice.
Do not damage the door seal.
Loosen the panel from the soft-
close mechanism by inserting a flat-
headed screwdriver into the gaps
from below and, taking care, gradu-
ally lifting the panel off.
Push the panel toward the ma-
chine and leave it hanging there be-
tween the door and machine to start
with.
Place the safety device (supplied
with the machine) on the soft-close
mechanism so that it engages.
The safety device prevents the hinge
from snapping shut.
Do not remove the red safety device
until instructed to do so.
Gently loosen the cover from the
latch by inserting a flat-headed
screwdriver from above and below.