Installation Instruction
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Adjusting the interior fittings (refrigerator section)
- Freezing and storing food
- Making ice cubes
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Water connection
- Electrical connection
- Installation
- Changing the door hinges
- Removing the door handles
- Removing the upper soft-close mechanism
- Removing the upper appliance door
- Removing the lower soft-close mechanism
- Removing the lower appliance door
- Refitting the lower appliance door
- Inserting the lower soft-close mechanism
- Refitting the upper appliance door
- Inserting the upper soft-close mechanism
- Refitting the handle
- Aligning the machine doors
Changing the door hinges
86
Inserting the lower soft-close
mechanism
Remove the cover from the
panel, turn it 180°, and reinsert it
on the other side.
Hook the spacer into the latch (A) on
the handle side.
Hook the soft-close mechanism into
the latch (B) on the appliance side.
Push both parts out so that they are
firmly engaged.
Use the screw to secure the
spacer and soft-close mechanism in
place.
Attach the panel onto the soft-
close mechanism bracket.
Pull the soft-close mechanism
bracket toward the hinge plate and
insert the pin from above so that
the square sits in the depression.
Fit the cover back into place so
that it engages.
Make sure that the cover fits prop-
erly so that the door can be closed
without hindrance and the pin is se-
cured.
Remove the safety device.