Operating instructions Gas hob KM 326G Conversion kit AH 102 C4U Instructions pour l’utilisation du dessus de cuisinière au gas KM 326G Kit de conversion AH 102 C4U a r t . n r. 7 2 2 . 3 9 2 .
english français page 1 - 27 operating instructions gashob KM 326G page 1 - 17 converting instructions converting kit AH 102 C4U page 18 - 27 CDN page 28 - 55 de cuisinière au gas KM 326G page 28 - 45 Mode d'emploi du kit de conversion AH 102 C4U page 46 - 55 USA CDN Instructions pour l’utilisation du dessus Warning If the information in this manual is not followed exactly, a fire or explosion may result causing damage to property, personal injury or death.
english français page 1 - 27 operating instructions gashob KM 326G page 1 - 17 converting instructions converting kit AH 102 C4U page 18 - 27 CDN page 28 - 55 de cuisinière au gas KM 326G page 28 - 45 Mode d'emploi du kit de conversion AH 102 C4U page 46 - 55 USA CDN Instructions pour l’utilisation du dessus Warning If the information in this manual is not followed exactly, a fire or explosion may result causing damage to property, personal injury or death.
Warning and safety instructions 2.8 2.7 3 4 1. Read all the instructions before using your hob unit. 2.6 2.5 2. Use the unit only for its intended purpose. 4.1 2.4 2.2/2.3 2.1 2. 4.2/4.3 4.4 5 3. Do not use the unit unless all parts are properly in place according to the installation and operating instructions. 4. Before servicing, disconnect the power supply by removing the plug or switching off the circuit breaker. 1 5. Never use the unit to warm or heat the room. 8 7 6 6.
Warning and safety instructions 2.8 2.7 3 4 1. Read all the instructions before using your hob unit. 2.6 2.5 2. Use the unit only for its intended purpose. 4.1 2.4 2.2/2.3 2.1 2. 4.2/4.3 4.4 5 3. Do not use the unit unless all parts are properly in place according to the installation and operating instructions. 4. Before servicing, disconnect the power supply by removing the plug or switching off the circuit breaker. 1 5. Never use the unit to warm or heat the room. 8 7 6 6.
Important notes for the user Gas burners OFF – Installation and maintenance should only be – When a gas cooking appliance is being used, If a burner blows out, the electronic ignition carried out by a suitably qualified person heat and moisture are produced in the area automatically sparks all burners to relight the (licensed gas fitter in Canada). where the appliance is situated. Make sure flame.
Important notes for the user Gas burners OFF – Installation and maintenance should only be – When a gas cooking appliance is being used, If a burner blows out, the electronic ignition carried out by a suitably qualified person heat and moisture are produced in the area automatically sparks all burners to relight the (licensed gas fitter in Canada). where the appliance is situated. Make sure flame.
How to use gas burners Cooking in comfort Pans and pots Place the pot over the pot support fitted above frying and pot-roasting The heat from the burner is transferred via the the hob. deep-frying and blanching pan base. If the base is thick, the heat will take cooking large quantities longer to reach the contents, but the base will stir-frying have a more uniform temperature. Thin and light are best done on the super high-speed wok pans will cause food to burn more easily.
How to use gas burners Cooking in comfort Pans and pots Place the pot over the pot support fitted above frying and pot-roasting The heat from the burner is transferred via the the hob. deep-frying and blanching pan base. If the base is thick, the heat will take cooking large quantities longer to reach the contents, but the base will stir-frying have a more uniform temperature. Thin and light are best done on the super high-speed wok pans will cause food to burn more easily.
Cleaning and maintenance Cleaning and maintenance (cont.) Disposal of packaging and appliance After cleaning always dry the burners and the The packaging of the appliance is recyclable. It electrodes, otherwise the flame will not ignite. is made up of: When using a cooker hood over the hob, ensure – cardboard Before cleaning, be certain the burners are turned off and the grates are cool.
Cleaning and maintenance Cleaning and maintenance (cont.) Disposal of packaging and appliance After cleaning always dry the burners and the The packaging of the appliance is recyclable. It electrodes, otherwise the flame will not ignite. is made up of: When using a cooker hood over the hob, ensure – cardboard Before cleaning, be certain the burners are turned off and the grates are cool.
Troubleshooting Electrical circuit diagram Problem Cause Solution Burner does not burn well – Burner dirty or moist – Clean and/or dry the burner – Not suitable for type of gas – Check identification plate SW1 SW2 SW3 SW4 SW5 and if necessary have the appliance adapted Ignition sparks but burner – Burner dirty or moist com S1 – Burner cap not aligned properly Ignition does not spark A re-ignition N earth – Clean and/or dry the burner does not ignite – Position the cap properly onto the ring
Troubleshooting Electrical circuit diagram Problem Cause Solution Burner does not burn well – Burner dirty or moist – Clean and/or dry the burner – Not suitable for type of gas – Check identification plate SW1 SW2 SW3 SW4 SW5 and if necessary have the appliance adapted Ignition sparks but burner – Burner dirty or moist com S1 – Burner cap not aligned properly Ignition does not spark A re-ignition N earth – Clean and/or dry the burner does not ignite – Position the cap properly onto the ring
Electrical connection Gas connection Connect the gas supply to the pressure The automatic ignition and the safety device These appliances must be installed with a regulator using a 1/2” gas line connector require connect ion to an A.C. single phase separate shut-off valve and a gas pressure between the shut-off valve and the pressure 120 V, 60 Hz supply. Fuse rating 6 A. regulator. regulator. Flexible harmonica-type stainless steel pipe is recommended.
Electrical connection Gas connection Connect the gas supply to the pressure The automatic ignition and the safety device These appliances must be installed with a regulator using a 1/2” gas line connector require connect ion to an A.C. single phase separate shut-off valve and a gas pressure between the shut-off valve and the pressure 120 V, 60 Hz supply. Fuse rating 6 A. regulator. regulator. Flexible harmonica-type stainless steel pipe is recommended.
b. The appliance must be isolated from the gas For Canada only Building-in dimensions supply piping system by closing its individual The gas connection must be made in accordance with the local codes, or in absence manual shut-off valve during any pressure of local codes, with the current CAN/CA B 149.1 testing of the gas supply piping system at and .2 Inst. test pressures equal to or less than 1/2 psi (3.5 kPa).
b. The appliance must be isolated from the gas For Canada only Building-in dimensions supply piping system by closing its individual The gas connection must be made in accordance with the local codes, or in absence manual shut-off valve during any pressure of local codes, with the current CAN/CA B 149.1 testing of the gas supply piping system at and .2 Inst. test pressures equal to or less than 1/2 psi (3.5 kPa).
Clearance above and around the appliance Building-in 1. Make the cut-out in the work surface. Ensure that there is sufficient space allowed at the min 33 1/4" (845 mm) sides and at the rear. min 33 1/14" (845 mm) 2. Attach the sealing strip to the underside of min 18" (460 mm) min 10" (254 mm) the hob and the aeration profile. min 10" (254 mm) 3.* Connect the pressure regulator supplied at the angle-joint, ensuring that they are positioned correctly. (See also not allowed “Gas Connection”.
Clearance above and around the appliance Building-in 1. Make the cut-out in the work surface. Ensure that there is sufficient space allowed at the min 33 1/4" (845 mm) sides and at the rear. min 33 1/14" (845 mm) 2. Attach the sealing strip to the underside of min 18" (460 mm) min 10" (254 mm) the hob and the aeration profile. min 10" (254 mm) 3.* Connect the pressure regulator supplied at the angle-joint, ensuring that they are positioned correctly. (See also not allowed “Gas Connection”.
WARNING This conversion kit must be installed by a qualified service agency in accordance with the manufacturer's instructions and all applicable codes and requirements of the authority having jurisdiction. If the information in these instructions is not followed exactly, a fire, explosion or production of carbon monoxide may result, causing property damage, personal injury or loss of life.
WARNING This conversion kit must be installed by a qualified service agency in accordance with the manufacturer's instructions and all applicable codes and requirements of the authority having jurisdiction. If the information in these instructions is not followed exactly, a fire, explosion or production of carbon monoxide may result, causing property damage, personal injury or loss of life.
Conversion instructions Caution Remove the three screws securing the dual ring Before proceeding with the conversion, shut off wok burner. Remove the wok burner base plate. pressures: min. 11" WC (5" WC, natural gas), max. the gas supply to the appliance prior to Lift the ceramic tray from the hob. 1/2 psi. Pressure regulator conversion purposes. Check gas pressure. Permitted disconnecting the electrical power.
Conversion instructions Caution Remove the three screws securing the dual ring Before proceeding with the conversion, shut off wok burner. Remove the wok burner base plate. pressures: min. 11" WC (5" WC, natural gas), max. the gas supply to the appliance prior to Lift the ceramic tray from the hob. 1/2 psi. Pressure regulator conversion purposes. Check gas pressure. Permitted disconnecting the electrical power.
Wok burner outer ring conversion 1. First loosen the 8 mm ring securing the gas Note feed pipe. Disconnect the gas pipe. The B 6. Reattach the gas pipe and tighten the 8 mm ring. actual injector is a thin metal cap mounted A between the two brass fittings attached to Note the left of the wok burner body. A B Outer ring airslot (B) gaspipe A injector B Adjust the air slot on the outer ring injector now. The correct distance for the air slot (B) is 0.083".
Wok burner outer ring conversion 1. First loosen the 8 mm ring securing the gas Note feed pipe. Disconnect the gas pipe. The B 6. Reattach the gas pipe and tighten the 8 mm ring. actual injector is a thin metal cap mounted A between the two brass fittings attached to Note the left of the wok burner body. A B Outer ring airslot (B) gaspipe A injector B Adjust the air slot on the outer ring injector now. The correct distance for the air slot (B) is 0.083".
Minimum adjustment screws 1. Lift and remove the small black ring if this is 3. Put the black switches with the light emitting still on the regulator shaft (see note in "Disassembly"). Installing appliance Testing converted appliance 1. Install the appliance according to the Note diodes back in place. 4. Attach the label 'This control has been installation instructions. This appliance has been internally tested for gas leakages by the manufacturer. converted for use with propane gas' to the 2.
Minimum adjustment screws 1. Lift and remove the small black ring if this is 3. Put the black switches with the light emitting still on the regulator shaft (see note in "Disassembly"). Installing appliance Testing converted appliance 1. Install the appliance according to the Note diodes back in place. 4. Attach the label 'This control has been installation instructions. This appliance has been internally tested for gas leakages by the manufacturer. converted for use with propane gas' to the 2.
Warranty and service Technical details The warranty period is effective from the date of purchase of the appliance. Model number: Gas source: KM 326G see identification plate All malfunctions caused by installation errors, improper use or maintenance are excluded from the Energy source: guarantee. Overall wattage, electricity: Evidence of the date of purchase must be provided upon request, for example through a delivery slip Total burnerrate or sales receipt.
Warranty and service Technical details The warranty period is effective from the date of purchase of the appliance. Model number: Gas source: KM 326G see identification plate All malfunctions caused by installation errors, improper use or maintenance are excluded from the Energy source: guarantee. Overall wattage, electricity: Evidence of the date of purchase must be provided upon request, for example through a delivery slip Total burnerrate or sales receipt.
Operating instructions Gas hob KM 326G Conversion kit AH 102 C4U Instructions pour l’utilisation du dessus de cuisinière au gas KM 326G Kit de conversion AH 102 C4U a r t . n r. 7 2 2 . 3 9 2 .
Operating instructions Gas hob KM 326G Conversion kit AH 102 C4U Instructions pour l’utilisation du dessus de cuisinière au gas KM 326G Kit de conversion AH 102 C4U a r t . n r. 7 2 2 . 3 9 2 .
Alteration rights reserved / 2503 This paper is made from cellulose bleached without the use of chlorine.
