Fitting Instructions

Umbau- und Montageanweisung
M.-Nr. 11313351 7 von 50
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten. 12.05.2021
A Vorderwand mit 4 Schrauben M4x25 anschrauben, siehe Abb. 7.
de
en
Installation instructions for APCLplinth 15/30
Reason: Fitting a washing machine or tumble dryer on a plinth enables a more ergonomic height to be achieved.
Included parts
No. Mat. no. Designation
1 Plinth
2 Tensioning strip
4 Washer B6.4
2 Hexagonal bolt M6x30
4 Nut M6
4 Plug S12
4 Washer 8.4
4 Hexagonal-head wood screw 8x65
8 Washer 15x44x3
8 Underlay
2 Clamping plate
4 Raised-head screw CEM6x12
2 Hexagonal bolt M6x20
1 Front panel (box plinth only)
2 Side panel (box plinth only)
12 Raised-head screw M4x25 (box plinth only)
Danger due to incorrect service and repair work
WARNING
 Danger due to incorrect service and repair work
There is a risk of serious damage, injury and even death if service and repair work is carried out incorrectly.
A Service and repair work should only be carried out by a suitably qualified electrician with specialist training,
knowledge and experience.
A All appropriate safety requirements must be taken into account.
A Wear personal protective equipment.
A First read the Miele service documentation, then commence work.
Measures to be carried out before commencing any service work on the appliance
- Carry out appropriate electrical safety checks.
- Disconnect all appliance utility connections in accordance with the operating instructions.
Measures to be carried out after service work has been completed
- Carry out appropriate electrical safety checks.
- Check the appliance for correct operation.