Assembly instruction

Umbau- und Montageanweisung
M.-Nr. 11313351 11 von 25
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten. 20.01.2020
Quantity Mat. no. Designation
4 8.4 washer
4 8 x 65 wood screw
8 15 x 44 x 3 washer
8 Spacer
2 Clamping plate
4 CEM 6 x 12 raised-head screw
2 M6 x 20 bolt
1 Front panel (closed stand only)
2 Side panel (closed stand only)
12 M4 x 25 raised-head screw (closed stand only)
Danger due to incorrectly carried out service and repair work
WARNING
 Danger due to incorrectly carried out service and repair work.
There is a risk of serious damage, injury and even death if service and repair work is
carried out incorrectly.
A Service and repair work should only be carried out by a suitably qualified electrician
with specialist training, knowledge and experience.
A All appropriate safety regulations must be taken into account.
A Read the technical service documentation (TSD) before starting service work.
Measures to be carried out before starting any service work
– Carry out appropriate electrical safety checks.
– Disconnect all machine utility connections in accordance with the operating
instructions.
Measures to be carried out after service work has been completed
– Carry out appropriate electrical safety checks.
– Check the appliance for correct operation.
Risk of cuts
WARNING
 Components are sharp.
Risk of cuts during service work.
A Wear protective gloves.