Operating instructions

Selecting the temperature for
ironing
The temperature selector on the iron is
used for setting the ironing
temperature.
The temperature settings are indicated
by dots around the selector. These dots
correspond to the international symbols
for ironing.
The yellow indicator light comes on
while the iron is heating up.
Material Dot
symbol
Temperature
range
Minimum iron/
Synthetics
ß Low
temperature
Woollens/
Silks
ßß Medium
temperature
Linen /
Cottons
ßßß High
temperature
^
Use the temperature selector to set
the temperature required.
The indicator lights up yellow while the
iron is heating up. When the set
temperature is reached, the indicator
light goes out. The iron is ready.
Steam can be used in the temperature
ranges between
ßß and ßßß.
Please note that the steam must be
ready * for steam ironing.
Steam readiness is indicated when the
* indicator light lights up on the control
panel.
In the ß temperature range, the
temperature of the iron sole plate is
too low for steam ironing.
Do not use the steam button on the
iron.
This will result in "spitting" from the
steam jets.
After increasing the temperature to
at least
ßß you must wait until the
heating-up phase is completed
before using the steam button.
Switching on
26