Operating instructions

Make sure that the metal contact
discs at the top of the residual water
container are cleaned and dried
properly. These metal discs send a
signal to the appliance when the
residual water container is full or if it
is not in the appliance. The discs will
not convey these signals if they are
dirty or damp.
^
Insert the residual water container
after a short interval (approx. 15
seconds) so that it clicks into place.
The 2 indicator light goes out.
The Fashion Master is now ready to use
again.
When the * light comes on, you can
use steam again.
Automatic descaling
The appliance should be descaled
regularly to ensure that it functions
correctly. The appliance has an auto
-
matic descaling function to assist you.
Frequency and requirement for
descaling is dependent upon the water
hardness level set. Descaling is
required more frequently with hard
water than with soft water.
Only use the Miele descaling tablets
supplied with the appliance. They
were specially developed for the
Miele Fashion Master to optimise the
descaling process. Other descaling
agents could damage the
appliance.
You will need one descaling tablet for
each descaling process.
Additional descaling tablets are
available from Miele or online (see
"Optional accessories").
The ironer or steamer must not be
connected during descaling. The
appliance can be left unattended
during descaling (providing the iron
or steamer is not connected).
Descale advanced warning
When there are approx. 2 operating
hours remaining before the next
descaling, the k indicator light begins
to flash red. The light will flash more
rapidly as the time counts down, until it
stays on permanently.
Cleaning and care
40