Operating instructions

Problem Possible cause Remedy
Water is leaking from
the steam ironing
system at the height of
the water container
when it is being
transported.
Water droplets can
collect in the area
under the water
container as a result
of frequent removal
and replacement of
the water container.
Dry the area underneath the
water container in the tower with
a cloth.
The iron or steamer
does not heat up.
The appliance is
switched off.
Switch the appliance on with the
On/Off button s.
The steam hose is
not plugged in
properly.
Remove the steam hose and
plug it into the steam connection
again (see "Connection").
The iron has not
been used for some
time.
Move the iron or operate the
steam button *.
The temperature set
on the temperature
selector has been
reached.
Wait a while until the iron heats
up again.
Or, if possible, select a higher
temperature.
The appliance is
rinsing.
Wait until the rinsing process has
been completed (see “Automatic
rinse”).
The indicator lights
are showing that
there is a fault.
Remedy the fault as explained
on the following pages.
The appliance is
damaged.
Call Miele Service.
Problem solving guide
51