Operating instructions

Problem Possible cause Remedy
The appliance
switches off during the
descaling process.
The iron or the
steamer was
connected during
the descaling
process.
Disconnect the iron or the
steamer from the steam
connection. Switch the
appliance on again.
The k indicator light is
on.
The water container
or contents have not
been recognised.
Remove the water container, fill
and replace it.
Rinsing or descaling could still
be taking place. Wait until the
process has finished.
Programming of the water
hardness level has not yet been
completed. Complete this
process.
If the indicator light is still on, call
Miele Service.
The k indicator light is
on during the
descaling process.
The water container
or contents have not
been recognised.
Insert the water container again.
Fill the water container with a
little more water and replace it.
If the indicator light is still on, call
Miele Service.
The l indicator light is
constantly lit up.
The steam
generator has
overheated.
Allow the steam ironing system
to cool down. The steam ironing
system is ready to use again
when the l indicator light has
gone out.
If the indicator light is still on, call
Miele Service.
Problem solving guide
54