Operating instructions

~
Do not use the appliance if the ironing table cover is damaged.
A damaged ironing table cover could be dangerous.
Do not use the appliance without an ironing table cover.
The ironing table cover must be replaced with an original Miele
cover.
~
The electrical safety of this appliance can only be guaranteed
when correctly earthed. It is most important that this basic safety
requirement is observed and regularly tested, and where there is
any doubt the household wiring system should be inspected by a
qualified electrician. The manufacturer cannot be held liable for
damage or injury caused by an inadequate earthing system (e.g.
electric shock).
~
Do not connect the appliance to the mains electricity supply by a
multi-socket adapter or an extension lead. These do not guarantee
the required safety of the appliance (e.g. danger of overheating).
~
This appliance complies with all relevant safety requirements.
Unauthorised repairs could result in unforeseen dangers for the
user, for which Miele cannot accept liability. Repairs should only be
undertaken by a Miele approved service technician, otherwise any
subsequent damage will not be covered by the guarantee.
~
Faulty components must only be replaced by genuine Miele
original parts. Only when these parts are fitted can the safety
standards of the appliance be guaranteed.
~
During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply.
~
Do not damage, remove or bypass the safety features, fixtures
and control elements of this appliance.
~
Any removable outer panels must be fitted in place, and all
moving or electrical parts shielded before it is switched on.
Warning and Safety instructions
8