User manual

Before using for the first time
26
Setting the water hardness

Set water
hardness...
Before the water hardness can be set,
the display message Set water hard-
ness... must be acknowledged by press-
ing the OK button.
The steam ironing system gives you
the option to set the water hardness to
one of 10 settings.
Use the following table to determine the
water hardness level that must be set
for your steam ironing system:
°dH mmol/l °f Setting
1-4 0.2 - 0.7 2-7
Level 1
5-7 0.9 - 1.3 9-13
Level 2
8-11 1.4 - 2.0 14-20
Level 3
12-15 2.2 - 2.7 22-27
Level 4
16-20 2.9 - 3.6 29-36
Level 5
21-25 3.8 - 4.5 38-45
Level 6
26-30 4.7 - 5.4 47-54
Level 7
31-36 5.6 - 6.5 56-65
Level 8
37-45 6.7 - 8.1 67-81
Level 9
46-70 8.3 - 12.6 83-126
Level 10
Level 7
 Use the or arrow buttons on the
control panel to set the water hard-
ness level for your household.
Tip: If the water hardness fluctuates
(e.g. 37-50°dH/6.7-9.0mmol/l), always
set the highest value (in this example
50°dH/9.0 mmol/l = Level 10).
Make sure the correct water hard-
ness level is set.
An incorrect setting will invalidate all
warranty claims.
Level 10
 Confirm your selection by pressing
theOK button.
The steam ironing system is now set for
the specified water hardness.
The water hardness level can be
changed at any time via the settings
menu (button,
optionWater hardness).