Operating Instructions Steam Ironing System To prevent accidents and appliance damage, read these instructions before installation or use. en-US,CA M.-Nr.
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Electrical and electronic appliances contain valuable materials.
Contents Caring for the environment .................................................................................. 2 IMPORTANT SAFETY INSTRUCTIONS ................................................................ 6 Product description............................................................................................. 14 Transport .............................................................................................................. 17 Assembly..............................................
Contents Active iron board ................................................................................................... Suction function ............................................................................................... Inflation function............................................................................................... Automatic switch on/off ................................................................................... Memory function ..................................
Contents Cleaning the water filter......................................................................................... Disconnect the power supply........................................................................... Removing the water container ......................................................................... Removing the water filter cover........................................................................ Removing the sealing ring.....................................................
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE This steam ironing system complies with all specified safety requirements. Inappropriate use can however lead to personal injury and damage to property. To avoid the risk of accidents and damage to the steam ironing system, please read these instructions carefully before using it for the first time. They contain important information on its safety, installation, use and maintenance.
IMPORTANT SAFETY INSTRUCTIONS Safety with children Children must be kept away from the appliance unless they are supervised. Children must be supervised in the vicinity of the steam ironing system. Do not allow children to play with it. Make sure that children cannot access the steam hose or the power cable, either during use or while the steam ironing system is cooling down. Danger of suffocation! Keep children away from any packing material.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Before setting up the steam ironing system, inspect it visually for any external damage. Do not use a damaged appliance. A damaged steam ironing system can be dangerous! Check the iron of the steam ironing system for damage. Do not use the iron if it has been dropped, if there is any visible damage or if it is leaking.
IMPORTANT SAFETY INSTRUCTIONS The electrical safety of this steam ironing system can only be guaranteed if it is grounded properly. It is essential that this standard safety requirement is met. If in any doubt, please have building's wiring system inspected by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate grounding system (e.g. electric shock). Do not use a power bar or an extension cord to connect the steam ironing system to the power supply.
IMPORTANT SAFETY INSTRUCTIONS The steam ironing system must not be used in a non-stationary location (e.g. on a ship). Correct use Emitted steam, the iron soleplate and the areas surrounding it on the iron and the steamer jets are very hot. Danger of injury by burning! Avoid direct contact with it. The steam ironing system is intended for domestic use only and is not designed for commercial purposes. Do not use a power washer or water hose when cleaning the steam ironing system.
IMPORTANT SAFETY INSTRUCTIONS Do not use solely demineralized water (e.g. distilled, battery water) to fill the water container. This could cause the steam ironing system to malfunction. Always place the iron with its soleplate horizontally on the resting surface of the steam ironing system. Ensure the steam function is switched off and the soleplate does not protrude over the edges.
IMPORTANT SAFETY INSTRUCTIONS Do not use the residual water container to store accessories or similar items. The residual water container should be used only to collect residual water. Do not plug any objects into the apertures on the steam ironing system. If an aperture is blocked, do not use the system. Do not hang items of laundry on the folded steam iron system. This may cause the steam ironing system to tip over. Avoid ironing across hard or sharp-edged items.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS 13
Product description a Ironing board i X-frame for the ironing board b Iron with steam hose j Iron resting surface c Steam hose holder k Power cord d Handle f Tower l Storage compartment (lower) For the power cord, the steamer*, the non-stick soleplate, and the holder for the power cord. g Residual water container m Wheels h Storage compartment (upper) For the iron and the steam hose holder. n Release handle To setup the steam ironing system.
Product description Tower a Rotary dial for height adjustment and dismantling the appliance Tower (top view) with open storage compartment (top) d Steam hose holders b Iron resting surface e Control panel c Steam connection f Steam hose holder g Iron with steam hose 15
Product description Some of the messages in the display are more than one line long. Touch the or arrow button to read them in full. Control panel on tower h On/Off button Switches the steam ironing system on or off. i Display Displays messages and instructions for the user. j Arrow button Lights up if additional options are provided or the display text exceeds the specified length of a line. Scrolls down the selection list to the next option or decreases a value.
Transport The steam ironing system is fitted with two wheels. This allows the appliance to be pulled across an even surface when folded up. Two people are required for carrying the steam ironing system up or down stairs. When doing so, ensure the ironing board is at the bottom. Hold the steam ironing system by its handle and tip it gently towards you until the wheels are free to roll. This allows you to navigate easily across obstacles such as carpet edges, door sills or single steps.
* I N S T A L L A T I O N * Assembly Take the steam ironing system to its set up location. Use one hand to pull the release mechanism upwards. This releases the locking mechanism of the ironing board and the X-frame folds down. Use both hands to pull the ironing board upwards into a horizontal position until this audibly clicks into place on both sides of the tower. click! click! Ensure the ironing board has locked into place on both sides of the tower.
* I N S T A L L A T I O N * Assembly Adjusting the height The steam ironing system can be adjusted to suit your personal preference. The maximum working height is 40 ¼" (102 cm). When adjusting the height, ensure the power cord does not become trapped in the mechanism. The steam ironing system is now assembled. This is its lowest working position of approx. 32 ¾" (83 cm) high. Use one of the rotary dials located on the side of the tower handle.
* I N S T A L L A T I O N * Assembly At the same time, pull the handle on the tower upwards with the other hand up or press the handle down. Do not push down on the ironing board while adjusting the height! Always use the handle on the tower to do this. When you have reached your desired working height, release the rotary dial. The rotary dial will spring back into the center position. The ironing board will remain at the adjusted height.
* I N S T A L L A T I O N * Connection Plug in the power cord The steam ironing system is designed for the connection to a properly installed grounded socket for AC 120 V, 15 A, 60 Hz. Guide the power cord through the groove in the cover. Close the (lower) storage compartment. Open the (lower) storage compartment by swinging the lid downwards. When closing the compartment, ensure the power cord does not become trapped between the lid and the casing or between the wheels and the tower.
* I N S T A L L A T I O N * Connection Removing the iron and the steam hose holder The steam ironing system is suitable for right- or left-handed people. The operation is optimized for both sides. Connecting the steam hose Lift the lid of the steam connection. Open the lid of the storage compartment (upper) on the tower. Take out the iron and the steam hose holder. Close the storage compartment lid. Pull back the slider on the steam hose plug. Insert the plug into the steam connection.
* I N S T A L L A T I O N * Connection Do not place the iron in its up- right position! It can easily tip over or fall to the floor. Always place the iron onto the resting surface with its soleplate down. If the iron remains on the resting Guide the steam hose on the rubber ring into the steam hose holder. Ensure the steam hose fits tightly and is not twisted. surface for any length of time, the surface will become hot. Avoid direct contact with the resting surface. Only touch the handle.
Initial commissioning Before using the steam ironing system for the first time, remove all packaging (e.g., the protective foil from the tower). Using the test strips to determine the water hardness Determining the water hardness To ensure the steam ironing system will function properly and the descaling reminder appears at the appropriate time, the appliance must be set to the water hardness level of your local water supply. The water hardness level indicates how much calcium is dissolved in the water.
Initial commissioning Before using for the first time The following steps must be carried out before using the appliance for the first time: Language setting english (GB) Switch on the steam ironing system Use the arrow buttons or to select your preferred language setting. Press the button on the control panel on the tower. english (US) To confirm your selection, press the OK button. Willkommen The Welcome screen appears for a few seconds in the display.
Initial commissioning Setting the water hardness level Level 7 Set water hardness... Before the water hardness can be set, the display message Set water hardness... must be acknowledged by pressing the OK button. The steam ironing system gives you the option to set the water hardness level from 1-10.
Initial commissioning The steam ironing system is now set up for use This completes the settings for using the appliance for the first time. The message Initial set-up complete will appear in the display. Confirm this message by pressing the OK button. The steam ironing system will normally run a rinse cycle automatically after it has been set up for use. The steam ironing system can then be switched off or you can continue using it.
Switching on the appliance Switching on the steam ironing system Press the button on the control panel of the tower to turn on the steam ironing system. The button is illuminated and the Welcome screen appears for several seconds in the display. If the iron was not connected to the steam connection before switching it on, the message Attach hose is displayed. In this case, the steam hose must be attached to the steam connection (see “Connection”).
Switching on the appliance Filling the water container Filling the water container If the water container is empty or not installed in the tower, the message Insert or refill the water container is displayed. Removing the water container Open the twist lock at the rear of the water container by turning the lock counterclockwise. Remove the twist lock. Hold the water container by its handle. Pull the handle down. The water container is released from the retainer.
Switching on the appliance Steam operation Ready After inserting the water container, wait until the steam ironing system is ready to use steam. This is indicated by the Ready message in the display. If the water container is filled during the ironing process, the steam generator may have to be reheated. Tip: If you fill the water container as soon as the Fill water cont. message is displayed and the container is inserted into the tower there is no delay.
Switching on the appliance Selecting the ironing temperature ➨ Use the temperature selector on the iron to set the ironing temperature. The temperature level Delicate/Synthetic indicates a soleplate temperature that is too low to iron with steam. If you use this temperature level, do not use the steam button. Otherwise, water will escape from the steam nozzles. Tip: Sort your laundry according to the heat sensitivity of the fabric.
Switching on the appliance Care label (on the garment) Low temperature Medium temperature High temperature 32 Ironing with steam for best results (Material / Temperature setting) With non-stick soleplate (see “Ironing with non-stick iron soleplate”) Minimum iron, synthetics, appliqués, prints, flocking, etc.
Switching on the appliance CoolDown function Iron switched off The heating of the iron switches off automatically if the iron is not moved for longer than 3 minutes. The message Iron switched off appears in the display to indicate that the heating has switched off. After a certain time, steam is no longer available. The message Release stm. button appears when the steam button is locked. In this case, unlock the steam button by pushing the slider on the iron forwards (see “Ironing”).
Ironing Iron Steam ironing system B 3847: Depending on the model, your steam ironing system has one of the following irons: Steam ironing system B 3312: a “Steam” button b Slider for constant steam c “Power output” button a “Steam” button b Slider for constant steam c “Suction” button d “Inflation function” button 34 d “Inflation/suction button” Irons supplied with previous Miele steam ironing systems (B 1xxx/B 2xxx) cannot be used with this appliance.
Ironing Ironing with steam The steam of your ironing system is ready to be used if the Ready is shown in the display. The burst of steam is controlled by the button. When pressing the button, the fan on the underside of the ironing board starts automatically. When the button is released, the fan will also stop after a brief time delay. When using the steam function for a long time, make sure the room is well ventilated, as high air humidity can develop.
Ironing Ironing without steam Remove the water container from the steam ironing system if you would like to iron without steam. Attaching the non-stick soleplate Place the tip of the iron inside the non-stick soleplate. This will not heat the steam generator, which also saves energy at the same time. Ironing with the non-stick soleplate There is a non-stick soleplate in the (lower) compartment. Simply clip the soleplate onto the iron.
Ironing Removing the non-stick soleplate Hold the handle of the iron. The non-stick soleplate is still very hot after ironing! Avoid direct contact with it. Only touch the tab of the non-stick soleplate. Active iron board The steam ironing system uses a fan that sucks away the steam or uses the inflation function to inflate the ironing board for optimum positioning while ironing garments. The , or , buttons on the iron control the fan in the ironing board.
Ironing Memory function Fan control for the B 3847: The memory function saves the fan direction and the power setting used last with your steam ironing system. When you use the appliance the next time, you do not need to set it again. Heated ironing surface When the iron is connected and the appliance is switched on, the surface of the ironing board will heat up automatically. This function reduces the formation of condensation on the ironing board.
Steamer The B 3847 steam ironing system is equipped with a steamer in addition to the iron. The steamer is available as an optional accessory for the B 3312 steam ironing system. Connecting the steamer You can also plug the steamer into the steam connection of the ironing system as an alternative to the iron. Disconnect the iron from the steam connection The iron soleplate is still very hot after use! Avoid direct contact with it.
Steamer Attaching the steamer to the steam connection You can at any time plug the iron into the steam connection as an alternative to the steamer. You do not need to switch off the steam ironing system to do this. After switching between the iron and the steamer, there is a short interval before the steam is ready. This ensures that sufficient steam is available. The steamer is ready when the message Ready is shown in the display. Pull back the slider located on the side of the steam hose plug.
Steamer Using the steamer Danger of burning due to hot steam! Never direct the steam or the steam jets at people, animals or electrical appliances of any kind. Never point the steam jet on clothing while the clothes are being worn! The clothing will cause intensified burning of the skin. Use short bursts of steam Briefly press the button. Then release the button again. Using steam Press the button. Keep the button depressed.
Steamer Brush attachment The steamer comes with a brush attachment which can be clipped on. The brush attachment helps to raise the fibers. You can hold the steamer directly onto the fabric while the brush attachment is in place. Always try it first on an inconspicuous part of the fabric. Connecting the brush attachment Guide the brush attachment into the notches on the opposite side. Press the brush attachment against the steamer until the lugs snap into the notches.
Switching off To switch off the steam system, press the button on the control panel. The illuminated button goes out. The steam system is now switched off. The last selected fan settings are saved and are available for the next time you switch on the steam ironing system. Place the iron on the resting surface until it is cooled down. The steam ironing system can be dismantled while the iron is cooling down (see “Dismantling”). Unplug the power cord from the outlet.
Dismantling Set the ironing board at its lowest working height To dismantle the steam ironing system, the ironing board must first be placed at its lowest working height. Make sure you do not trap the power cord in the system. Ensure the residual water container is completely emptied, pushed in and locked in place. Keep holding the rotary dial in the position and, simultaneously, use the handle of the tower to push the ironing board down as far as possible.
Dismantling Folding the ironing board Turn one of the two rotary dials to the position as far as it will go. Push the ironing board up by the tapered end until it is upright and locks into position on the tower. The ironing board is now unlocked. Release the rotary dial. The rotary dial will spring back into the center position. Push the protruding end of the Xframe onto the ironing board until the frame locks into place.
Dismantling Disconnecting the steam hose Do not pull on the steam hose! Hold the plug at the end of the steam hose. The plug may still be warm immediately after use. Storing the iron The iron soleplate is still very hot after use! Avoid direct contact with it. Allow the iron to cool down after use. Never stow the iron away while it is still attached to the steam connection. Place the iron on the resting surface on the tower and let the iron cool down.
Dismantling Emptying the water container Empty the water container if the steam ironing system will not be used for a long period of time. Storing the steam ironing system Take the appliance to its storage place. Remove the water container (see “Filling the water container”). Make sure the water container is completely emptied. Do not store the appliance in a room where temperatures below freezing may occur. Frozen water can cause damage to the water container, steam generator and steam hose.
Cleaning and care Automatic rinsing The automatic rinse function clears the steam generator of mineral deposits from the evaporated water. After approx. 0.8 gal (3 liters) of water have been passed through the system, and after the steam ironing system has been turned on, the rinse process starts automatically. The rinsing process takes several minutes. Steam escapes and splashing noises can be heard. At the same time, the message Appliance rinsing will be shown in the display on the tower.
Cleaning and care The residual water container is dishwasher-safe or can be washed by hand using warm water and a little washing-up liquid. Make sure the metal disks (contacts) at the top of the residual water container are clean and dry. These metal disks send a signal to the steam ironing system when the residual water container is full or if it is inserted into the tower. The disks will not function correctly if they are dirty or damp.
Cleaning and care Descaling warning Descale soon will appear in the display the next time you switch the steam ironing system on if there are only about 2 hours of ironing available before the system needs descaling. You can start the descaling process whilst the system is cold via the settings menu (see “Starting the descaling process early”) or you can press the OK button to confirm the message in the display and continue ironing as normal.
Cleaning and care Starting the descaling process early Ready With the steam ironing system switched on, press the button on the control panel. Descaling process The following display messages will guide you through the entire descaling process. Only proceed with the required action if you are prompted to do so by the appropriate message in the display. Detach hose The settings menu will be displayed. Use the arrow buttons to select individual settings.
Cleaning and care Fill water container to mark Add descaler Turn the twist lock on the rear of the water container counterclockwise and remove the twist lock. Hold the water container by its handle. Pull the handle down. The water container is released from the retainer. Pull the water container upwards and out. You may notice some water dripping when removing the water container while the water container valves are closing.
Cleaning and care Insert water cont. Add descaler Press the OK button to display the next process step. The message Insert water cont. is now shown in the display. Put the water container back into the tower. After about 10 minutes (the time it takes for the descaling tablet to dissolve), the descaling process begins automatically. Messages in the display will tell you when to empty the residual water container or when to fill the water container.
Cleaning and care Empty drawer This message may be displayed after inserting the water container with the descaling tablet. If you do not see this message, you can skip the following steps and continue as soon as you see the Pre-rinse message in the display. If the steam ironing system is still from the previous use, the cool down phase will start first. This may take up to 3 hours.
Cleaning and care Rinse water container and fill to the mark Pull the residual water container out of the tower. As long as the water container is not inserted into the tower, the display will show the following message Insert water cont.. Open the twist lock. Rinse the water container thoroughly. Make sure there are no residues of the descaling tablets remaining in the water container. Empty drawer Remove the residual water container from the tower.
Cleaning and care Descale After an activation period of approx. 1 hour, the descaling solution is drained from the steam generator into the residual water container. The steam generator is then rinsed with water. This rinse cycle takes approx. 5 minutes. During this time, the Rinsing (5 min) message is displayed. During the rinse cycle the Rinsing message is displayed.
Cleaning and care Rinsing the soleplate The iron must not be warm from previous use. Let the iron cool down for at least 60 minutes before rinsing the soleplate. Make sure that the non-stick soleplate has been removed from the iron. If the non-stick soleplate is still on the iron, remove it now (see “Removing the non-stick soleplate”). Fill the water container with fresh tap water (see “Filling the water container”).
Cleaning and care Now set the temperature selector on the iron to the highest temperature setting Linen/Cotton. Cleaning the housing Before cleaning the housing, the plug must be removed from the socket. Depending on the level of soiling, use a dry or damp soft cloth to clean the housing. Do not use abrasive agents. Cleaning the soleplate of the iron The soleplate of the iron remains The indicator light on the temperature selector will light up yellow while the iron is heating up.
Cleaning and care – abrasive cleaning agents (e.g., powder cleaners and cream cleaners, chrome polish, eraser sponges). – hard, abrasive brushes or sponges (e.g., pot scourers) or sponges which have been previously used and still contain abrasive cleaning agents. – pointed objects. Cleaning or replacing the ironing board cover If the ironing board cover is soiled, you can wash and dry it. If the ironing board cover is damaged, it must be replaced before using the steam ironing system again.
Cleaning and care Wash and dry the ironing board cover according to the care label or replace the cover if it is damaged. Never use the steam ironing system without the ironing board cover in place! Put the dry or new cover onto the ironing board from the tower end first and draw it down toward the tapered end of the ironing board. Use the cord to pull the cover taut. Ensure the cover is secure. Close the fastener of the cover by pushing the small grooved wheel of the fastener to the middle.
Cleaning and care Removing the water filter cover Removing the sealing ring Use a Phillips-head screwdriver to remove the screw of the water filter cover. Use the hook on the water filter cover to pull the sealing ring up and out of the right-hand socket. Pull the water filter cover upwards. The water filter must be taken out of the right hand socket for cleaning. There is a hook and a round tool at the sides of the water filter cover.
Cleaning and care Pull out water filter Inserting the water filter Position the water filter with the small seal facing downwards. Press the water filter fully into the right-hand socket. Then replace the seal in the righthand socket. The side with the ridge must face downwards. Push the round tool on the water filter cover onto the water filter from above. The round retainer tool will clicks into the water filter. Pull the water filter out of the socket.
Cleaning and care Use a Phillips-head screwdriver to tighten the screw. Inserting the water container Replace the water container in the retainer in the tower. The steam ironing system is now ready for use again. If the water filter is not inserted, the steam ironing system will not work. The water filter must be replaced if it is worn or damaged. Replacement filters are available from your Miele retailer or Miele Service.
Optional accessories Miele appliances are designed to achieve the best possible results and to provide uncompromising satisfaction for as long as possible. To achieve this, all factors must interact perfectly with one another. Therefore Miele offers a comprehensive range of accessories that harmonize with Miele appliances for optimum performance. Accessories The following items are just a few examples from our broad range of products which is available to order from our Miele online store or Miele.
Optional accessories Steamer Care products The steamer makes ironing hanging textiles easier, e.g. dresses and jackets. It comes with a removable brush attachment for lifting the fibers. The Miele care product range has been developed specially to clean your appliance thoroughly and gently. The steamer can be used with any Miele steam ironing system, regardless of model.
Frequently asked questions Most faults can be resolved by yourself. In many cases this will save you time and money because you won't need to book a service technician. The following guide should help you to find the reason for a fault, and to correct it. Please note: Repair work to electrical appliances must only be carried out by an autho- rized technician. Repairs by unqualified persons can cause considerable danger to users. Some of the messages in the display are more than one line long.
Frequently asked questions Problem solving guide Problem Possible cause and solution The steam ironing sys- The appliance does not have any power. tem cannot be switched Check whether on. – the plug is inserted into the wall socket. – the fuse in your fuse panel is OK. After a power outage, The steam ironing system is switched off the steam ironing sys Use the button on the control panel to switch tem does not work anythe steam ironing system on. more.
Frequently asked questions Problem Possible cause and solution The ironing board cannot be set in the final position during assembly or dismantling. The ironing board became dislodged from the latching mechanism when the board was not in its lowest position. The resting surface of the iron remains hot af- ter ironing. Danger of injury by burning! Unplug the power cord from the outlet.
Frequently asked questions Problem Possible cause and solution The iron does not heat up. The appliance is switched off. Use the button on the control panel to switch the steam ironing system on. The steam hose is not plugged in properly. Plug the steam hose into the steam connection on the tower again (see “Connection”). The iron has not been used for some time. Move the iron or activate the steam button . The steam button is locked.
Frequently asked questions Problem Possible cause and solution The temperature of the iron is always high. There is a fault. Contact Miele. The cover of the ironing There is a fault. board is damp. Remove the ironing board cover and allow it to dry. Put the dry ironing board cover back on (see “Cleaning or replacing the ironing board cover”). If the ironing cover gets damp again, contact Miele Service.
Frequently asked questions Problem Possible cause and solution The steam function on the iron or the steamer is not working. The steam ironing system is not connected to the wall socket. Insert the plug into the electrical socket. Use the button on the control panel to switch the steam ironing system on. The iron or the steamer is not connected. Attach the steam hose of the iron or the steamer to the steam connection of the tower. The water container is empty or missing.
Frequently asked questions Display messages Message Possible cause and solution Drain valve closing When the steam ironing system was switched on, the steam generator drain was open. The drain is closed automatically during this message. Drain valve fault The descaling or rinsing processes have not been carried out properly. Press the button to switch the steam ironing system off and then back on again. If the fault message continues to be displayed, contact Miele Service.
Frequently asked questions Message Possible cause and solution There is a fault with the steam system. Press the button to switch the steam ironing system off and then back on again. Intake fault, Boiler Switch Off/On After the cool-down phase, the steam ironing system carries out a rinse function and attempts to correct the fault itself. The cool-down phase can take up to 3 hours. Remove the residual water container if you are prompted to do so by the appropriate message in the display.
Frequently asked questions Message Possible cause and solution There is a fault with the steam ironing system. Press the button to switch the steam ironing system off and then back on again. If the fault continues to be displayed, contact Miele Service. Boiler fault, cold Switch Off/On Release stm. button The iron has switched itself off because it has not been used for a period of time and the steam button has locked.
Frequently asked questions Message Possible cause and solution Fault codes: There is an internal fault. Press the button to switch the steam ironing system off and then back on again. F38: ELP/EW/LNG F44 F45: LNG F47 The steam ironing system will try and rectify the fault itself. If the fault code continues to be displayed, contact Miele Service.
Technical service After sales service Warranty In the event of a fault that you cannot correct yourself, please contact For further information, please refer to your warranty booklet. – Your Miele dealer or – Miele Technical Service The telephone number for Miele is listed at the back of these instructions. Technical service requires the model and serial number of your appliance. The information can be found on the data plate which is located on the tower behind the water container.
* I N S T A L L A T I O N * Electrical connection Verify that the voltage, load and circuit rating information found on the data plate match the household electrical supply. This data must match to prevent damage to the steam ironing system. If in doubt, consult a licensed electrician. All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous.
Technical data Dimensions, folded (H x W x D) 50 ³/₈" x 18 ¹/₂" x 14 ⁹/₁₆" (1280 x 470 x 370 mm) Assembled dimensions (H x W x D) 38 ³/₁₆" x 18 ¹/₂" x 58 ¹/₄" (970 x 470 x 1480 mm) Weight 64 lb (29 kg) Connection voltage See data plate Power rating See data plate Fuse rating Steam pressure for B 3312 Steam pressure for B 3847 Steam output Capacity of water container ≥ 10 A 50.76 psi (3.5 bar) 58.01 psi (4 bar) 100 g/min 42 oz (1.25 l) Length of power cord 98 ⁷/₁₆" (2.
Please have the model and serial number of your appliance available when contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com International Headquarters Miele & Cie.
FashionMaster en-US,CA M.-Nr.