Operation Manual

Using the residual heat, Energy-save
function
Shortly before the end of cooking time
the oven heating switches off
automatically.
The residual heat in the oven is
sufficient to complete the cooking
process.
"EC" will appear in the oven display
instead of the actual oven temperature
to show that the oven in energy save
mode.
The cooling fan continues to run, as
does the hot air fan if a "fan" setting had
been chosen.
The oven heating will switch on again if:
– the required temperature is altered.
–
the cooking time is lengthened
significantly.
At the end of cooking time
–
an audible tone sounds for approx. 3
seconds.
–
the ")" symbol flashes at the same
time.
–
the cooling fan will continue running
until the temperature in the oven has
fallen sufficiently.
Both the audible tone and the flashing
symbol can be cancelled by turning the
function selector to the "0" position.
If the audible tone is not switched off it
will continue to sound at 5 minute
intervals as a reminder that cooking
time has finished. This reminder
continues for up to an hour.
To check and change an
entered time
It is possible to check or change times
entered for a cooking process, at any
time by calling up the relevant symbol.
To delete a time entered
^
Turn the function selector to "0".
If there is a power cut all data entered
will be deleted.
Programming cooking times
35