Operating instructions/Installation instructions
Table Of Contents
- Title page
- Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Appliance description
- Caring for the environment
- References to illustrations
- Preparing for use
- Attaching the suction hose (Fig. 01)
- Disconnecting the suction hose (Fig. 02)
- Connecting the suction hose to the handle (Fig. 03)
- Connecting the handle to the wand (Fig. 04)
- Adjusting the telescopic wand (Fig. 05)
- Connecting the telescopic wand to the floorhead/floorbrush (Fig. 06)
- Adjusting the floorhead (Fig. 07 + 08)
- Using the accessories supplied (Fig. 09)
- Use
- Parking, transport and storage
- Maintenance
- _
- Emptying the dust container (Fig. 21 - 26)
- Cleaning the dust container
- Cleaning the filter frame (Fig. 27 + 28)
- Cleaning the fine dust filter
- Starting the ComfortClean self-cleaning function manually (Fig. 29)
- When to change the thread catchers?
- How to replace the thread lifters (Fig. 30 + 31)
- Cleaning the roller on the AllTeQ floorhead (Fig. 32)
- Cleaning and care
- Frequently Asked Questions
- Frequently asked questions
- Technical Service
- Optional accessories
- Purchasing accessories
- Floor tools / Brushes
- AllergoTeQ floorhead (SBDH 285-3)
- TurboTeQ Turbobrush (STB 305-3)
- Parquet Twister floorbrush with swiveling head (SBB 300-3)
- Floorbrush Parquet Twister XL with swiveling head (SBB 400-3)
- Other accessories
- MicroSet accessory case (SMC 20)
- Turbo XS hand turbo brush (STB 20)
- Universal brush (SUB 20)
- Radiator brush (SHB 30)
- Mattress tool (SMD 10)
- Crevice nozzle, 12" (300 mm) (SFD 10)
- Crevice nozzle, 22" (560 mm) (SFD 20)
- Upholstery nozzle, 7 1/2" (190 mm) (SPD 10)
- Contents
- Leere Seite
- Leere Seite
- Leere Seite
en-US
21
Contact information for Miele Service
can be found at the end of this
document.
Warranty
For more information about warranty
conditions, please contact Miele Tech-
nical Service.
Optional accessories
Please be sure to observe your floor-
ing manufacturer's cleaning and care
instructions.
Only use genuine accessories with
the “ORIGINAL Miele” logo on them.
This will ensure that the suction
power of the vacuum cleaner is opti-
mally maintained, and the best pos-
sible cleaning result can be
achieved.
Please note that faults and damage
caused by use of accessories which
do not bear the “ORIGINAL Miele”
logo are not covered by the vacuum
cleaner guarantee.
Purchasing accessories
Original Miele accessories are available
from the Miele Webshop, Miele Service,
and your Miele dealer.
Original Miele accessories are identified
by the “ORIGINAL Miele” logo on the
packaging.
Certain models are supplied as stan-
dard with one or more of the following
accessories.
Floor tools / Brushes
TurboTeQ Turbobrush (STB 305-3)
This brush is ideal for cleaning short-
pile carpet.
Parquet Twister floorbrush with
swiveling head (SBB 300-3)
With natural bristle for vacuuming
smooth hard floors and small gaps.
Floorbrush Parquet Twister XL with
swiveling head (SBB 400-3)
With natural bristles for quickly vacu-
uming smooth hard floors and small
gaps.