Operating instructions/Installation instructions
Table Of Contents
- Title page
- Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Appliance description
- Caring for the environment
- References to illustrations
- Preparing for use
- Attaching the suction hose (Fig. 01)
- Disconnecting the suction hose (Fig. 02)
- Connecting the suction hose to the handle (Fig. 03)
- Connecting the handle to the wand (Fig. 04)
- Adjusting the telescopic wand (Fig. 05)
- Connecting the telescopic wand to the floorhead/floorbrush (Fig. 06)
- Adjusting the floorhead (Fig. 07 + 08)
- Using the accessories supplied (Fig. 09)
- Use
- Parking, transport and storage
- Maintenance
- _
- Emptying the dust container (Fig. 21 - 26)
- Cleaning the dust container
- Cleaning the filter frame (Fig. 27 + 28)
- Cleaning the fine dust filter
- Starting the ComfortClean self-cleaning function manually (Fig. 29)
- When to change the thread catchers?
- How to replace the thread lifters (Fig. 30 + 31)
- Cleaning the roller on the AllTeQ floorhead (Fig. 32)
- Cleaning and care
- Frequently Asked Questions
- Frequently asked questions
- Technical Service
- Optional accessories
- Purchasing accessories
- Floor tools / Brushes
- AllergoTeQ floorhead (SBDH 285-3)
- TurboTeQ Turbobrush (STB 305-3)
- Parquet Twister floorbrush with swiveling head (SBB 300-3)
- Floorbrush Parquet Twister XL with swiveling head (SBB 400-3)
- Other accessories
- MicroSet accessory case (SMC 20)
- Turbo XS hand turbo brush (STB 20)
- Universal brush (SUB 20)
- Radiator brush (SHB 30)
- Mattress tool (SMD 10)
- Crevice nozzle, 12" (300 mm) (SFD 10)
- Crevice nozzle, 22" (560 mm) (SFD 20)
- Upholstery nozzle, 7 1/2" (190 mm) (SPD 10)
- Contents
- Leere Seite
- Leere Seite
- Leere Seite
en - IMPORTANT SAFETY INSTRUCTIONS
9
Do not vacuum up any flammable or combustible liquids
or gases and do not vacuum in areas where such sub-
stances are stored.
Do not vacuum at head height and do not let the suction
get anywhere near a person's head.
Accessories
To avoid the risk of injury when vacuuming with a Miele
turbobrush, do not touch the rotating roller brush.
It is not advisable to vacuum directly with the handle,
i.e., without an accessory attached, as the rim could get
damaged and you could hurt yourself on sharp edges.
Only use accessories with the “ORIGINAL Miele” logo
on them. Otherwise the manufacturer cannot guarantee the
safety of the product.
California Proposition 65
THE FOLLOWING WARNING IS REQUIRED BY THE STATE OF CALIFORNIA
FOR CALIFORNIA RESIDENTS ONLY:
WARNING:
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov.
SAVE THESE INSTRUCTIONS