Operating and installation instructions Built-in coffee machine CVA 6805 (C) To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en - GB M.-Nr.
Caring for the environment Disposal of the packing material The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites.
Contents Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Operation . . . . . . . . . . . . . . . . . .
Contents Setting up profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Calling up a profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Creating a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Selecting a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Changing the name .
Contents Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Rinsing the coffee machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Guide to the machine Exterior view a On/Off sensor K b Touch display c "Back" # sensor d Handle e Hot water spout f Drip tray cover g Central spout with lighting and automatic height adjustment h Milk flask and lid 6
Guide to the machine Interior view i Ground coffee chute cover j Brew unit k Ground coffee chute l Slide control to select fineness of ground coffee m Coffee bean container n Water container with inlet device o Drip tray with grid p Waste container q Drip catcher r Central spout connector s Service panel 7
Accessories Accessories supplied Optional accessories – Measuring spoon for ready ground coffee Miele accessories and cleaning and conditioning products are available for your coffee machine.
Warning and Safety instructions This coffee machine complies with all statutory safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time. They contain important information on installation, safety, use and maintenance. Miele cannot be held liable for damage caused by non-compliance with these instructions.
Warning and Safety instructions Safety with children , The spouts present a danger of burning or scalding. Children's skin is very sensitive and reacts to hot temperatures. Do not allow them to touch hot components of the coffee machine or to place any part of their body under the spouts. ~ Install the coffee machine where it is out of the reach of children. ~ Children under 8 years of age must be kept away from the machine unless they are constantly supervised.
Warning and Safety instructions Technical safety ~ Installation and repairs may only be carried out by a Miele authorised service technician. Installation, repairs and other work by unqualified persons can cause considerable danger to users. The manufacturer cannot be held liable for unauthorised work. ~ A damaged coffee machine could be dangerous. Before building in the machine, check it for any externally visible damage. Do not use a damaged machine.
Warning and Safety instructions ~ The coffee machine must not be used in a non-stationary location (e.g. on a ship). ~ The second electrical connection socket on the back of the machine may only be used for connecting a Miele EGW 4000-29, EGW 5000-14 plate warming drawer or an ESW 6x14, ESW 6x29 food warming drawer. ~ Only use the coffee machine in rooms where the ambient temperature is between +10 °C and +38 °C. ~ Ensure that there is sufficient ventilation around the coffee machine.
Warning and Safety instructions ~ The integrated water protection system offers protection from water damage, provided the following conditions are met: – The coffee machine is correctly installed, connected to the electrical supply and plumbed in. – If a fault is identified, the machine must be repaired immediately. – The stopcock is turned off when the machine is not used for a longer period of time (e.g. during holidays).
Warning and Safety instructions Correct use , The spouts present a danger of burning or scalding. The liquids and steam dispensed are very hot. Water in the drip tray can also be very hot. Take great care when emptying it. Please note: – Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. – Do not touch hot components. – The spouts can spray hot liquid or steam. Make sure that the central spout is clean and that it is fitted correctly.
Warning and Safety instructions ~ Please note the following regarding water: – When using the water container: Only use cold, fresh tap water to fill the water container. Hot water and other liquids could damage the machine. – Change the water every day to prevent a build-up of bacteria. If the machine is connected to the mains water supply: Empty the water container once a day. – Do not use mineral water. Mineral water will cause serious limescale deposits to build up in your machine and damage it.
Warning and Safety instructions ~ Please note the following with regard to cleaning the coffee machine: – Always disconnect the coffee machine from the electrical supply before cleaning. – Clean the coffee machine and the milk flask every day (see "Cleaning and care" for more information). – Do not use a steam cleaner to clean the machine. Steam could reach electrical components and cause a short circuit.
Operation Touch display The coffee machine is operated by finger tip contact. Touching the Touch display with your finger creates a tiny charge which releases an electrical impulse. This impluse is picked up by the Touch display. It is possible for the Touch display not to react to your finger contact if your fingers are cold. Do not use pointed or sharp objects, e.g. pens to operate the Touch display as they can damage the surface. The Touch display will also not react to being tapped by such objects.
Operation Operation Each touch of an available option changes the relevant field to orange. Selecting or calling up a menu ^ Touch the field you want once with your finger. Scrolling ^ Swipe the screen, i.e. place your finger on the Touch display and swipe it in the direction you want. You can scroll to the right or the left. Some options allow you to scroll up and down too. ^ Touch the V and W arrows to scroll to the left or right.
Operation The numerical keypad will appear. ^ Touch the numbers you want. When you enter a valid number the "OK" field will go green. ^ Touch "OK". Entering letters Profile names or the names for your own drinks are entered using a keyboard. It is best to select short names. ^ Touch the letters or characters you want. ^ Touch "Save".
Operation The following symbols can appear in addition to the text and the drinks symbols: P P P P G G GM Settings, e.g. the brightness of the display or the volume of the buzzer and keypad tones, are selected via a bar chart. : This indicates information and instructions about operating the coffee machine. Confirm the messages with "OK". 0 The system lock is active (see "Settings - Locking the coffee machine (System lock 0)").: The coffee machine cannot be operated.
Using for the first time Selecting the language Please read the operating instructions carefully and take the time to familiarise yourself with the coffee machine before using it for the first time. Before using for the first time ^ The machine must be correctly installed and connected (see "Electrical connection" and "Installation") before it is used for the first time. ^ Remove any protective foil.
Using for the first time Display Water hardness You can choose from the following options: The water hardness level indicates how much calcium is dissolved in the water. The higher the calcium content, the harder the water, and the harder the water, the more often the coffee machine will need to be descaled. – On: the display will always show the date and time (even when the machine is switched off). – Off: the display is dark when the machine is switched off.
Using for the first time Checking the water hardness level You can use the test strip supplied to check the water hardness level, or your local water supplier will be able to advise you on the hardness of the water in your area. ^ Dip the test strip in your drinking water for a second, then shake off any excess water. The result will be evident after about a minute. You can now set the water hardness level for the coffee machine. Setting the water hardness level ^ Touch "Settings" %.
Filling the water container If the machine is plumbed into the mains drinking water supply, the water container will fill automatically as soon as the machine is switched on. The inlet device on the lid of the water container ensures that the water is taken in slowly. You can also fill the water container manually if you are not using the plumbed in water supply. ,Bacteria can cause infection.
Filling the coffee bean container If you want to use freshly ground coffee beans for each cup of espresso or coffee, fill the coffee bean container with roasted coffee beans. Alternatively, you can make coffee or espresso with ready ground coffee (see "Making coffee or espresso using ready ground coffee"). Warning. Only put roasted espresso/coffee beans in the container. Anything else, including ground coffee, will damage the grinder. Warning. Sugar will damage the coffee machine.
Switching the coffee machine on and off Switching on Switching off When the machine is switched on it heats up and rinses out the pipework. This cleans and heats the pipework in preparation for making coffee. ^ Touch the On/Off sensor K. If the coffee machine still has an operating temperature higher than 60 °C, then rinsing will not take place. ^ Touch the On/Off sensor K. Tip: If you do not want the water from the rinsing process to flow into the drip tray, place a suitable container, e.g.
Spout adjustment (CupSensor) Switching spout adjustment on or off The central spout cannot be adjusted manually. The coffee machine senses the height of the cup or glass being used. When a drink has been selected the central spout moves automatically to the optimum height before dispensing the drink. Make sure that there is not a spoon or similar item in the cup. This would prevent the coffee machine from sensing the cup height correctly. ^ Touch "Main menu" or the # sensor. ^ Touch "Settings" %.
Making drinks Espresso, Coffee or Long coffee These drinks are in the drinks menu. Making two portions You can request two portions of espresso, coffee or long coffee to be dispensed at once either into one cup or two separate cups. These drinks are in the drinks menu. To dispense two cups of coffee or espresso at the same time: ^ Place a cup under the central spout. ^ Touch Espresso ., Coffee / or Long coffee /. The coffee or espresso will be dispensed from the central spout into the cup.
Making drinks Cancelling preparation To cancel preparation: ^ Touch "Stop" or ^ Touch "Cancel". Dispensing several cups of coffee one after the other (Coffee pot ²) You can make several cups of coffee one after the other automatically with the "Coffee pot" function (max. 1 litre). Up to eight cups can be made at once. ^ Place a suitable container underneath the central spout. ^ Swipe the display until "Coffee pot" ² appears and then touch this.
Making drinks Adding ready ground coffee Use the coffee spoon supplied. Do not add more than one level spoon of ground coffee to the coffee chute. If too much is added, the brew unit will not be able to process the coffee. The coffee machine will use all the ground coffee which has been added to the chute to make the next coffee. ^ Open the front of the coffee machine. ^ Remove the cover of the ground coffee chute. Open the lid of the chute.
Making drinks Drinks with milk Only use pasteurised milk to avoid a build-up of bacteria. You can use milk to make different coffee specialities, hot milk or milk froth. The following can be made: Cappuccino H consisting of two thirds milk froth and a third espresso. a lid Latte macchiato k consisting of a third hot milk, a third milk froth and a third espresso. b sensor Caffè latte ± consisting of hot milk and coffee. d glass flask Milk flask The milk will not keep cool in the milk flask.
Making drinks Making drinks with milk Making drinks using a profile These drinks are in the drinks menu. If you have set the machine up for a specific user profile (see "Profiles") you can select this before you make a drink. ^ Place a suitable container underneath the central spout. ^ Swipe the display until the drink you want appears and then touch this. The coffee selected will be dispensed. ^ Touch "Profile" {. ^ Swipe the display until "Select profile" appears and then touch this.
Coffee the way you like it To customise the coffee machine to suit your exact requirements, you can – adjust the grinder setting, – change the amount of coffee, – set the brewing temperature, or – switch on the "Pre-brewing" option. Grinder setting You can adjust the grinder setting to suit the type of coffee you are using. To avoid damaging the grinder: Only ever adjust the grinder by one setting at a time. Grind the coffee beans again if you want to adjust the grinder to the next setting.
Coffee the way you like it Altering the drinks parameters You can set the amount of coffee, pre-brewing and the brewing temperature for each drink individually. Start in the drinks menu. ^ Touch "Process" or swipe the screen until "Make drinks" appears and touch this. ^ Touch "Change drink". ^ Swipe the screen until the drink you want appears and then touch this. ^ Touch "Drink parameters". – espresso or coffee only trickles into the cup. – the crema is dark brown. – the espresso or coffee tastes bitter.
Coffee the way you like it ^ Swipe the screen in the "Brew temperature" field until the setting you want appears. ^ Touch "OK". The setting is now saved. Pre-brewing the coffee When the Pre-brewing function is switched on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavour of the coffee. You can select a short or long Pre-brewing, or deselect "Pre-brewing" altogether.
Setting the portion size The flavour of the coffee produced depends on the type of coffee, how finely the beans are ground and the quantity of water used. You can programme the amount of water used for espresso, coffee or hot water to suit the size of your cup and the type of coffee you are using. Setting the portion size For coffee made with milk, in addition to programming the portion size of coffee you can programme the amount of milk and milk froth used.
Setting the portion size The coffee machine starts making the drink. You can now programme the portion size for each selected ingredient as soon as Save appears in the display. ^ Touch "Save" when the amount you want of the particular ingredient has been dispensed. ^ Save the portion size required for the selected ingredients. The programmed mix of ingredients and portion sizes will now be dispensed every time that particular drink is selected.
Resetting drinks You can reset the portion sizes and the parameters for all drinks back to their factory default setting. Start in the drinks menu. ^ Touch "Process". ^ Touch "Reset drinks". "Reset all drinks to default?" will appear in the display. ^ Touch "Yes".
Setting up profiles You can enter individual profiles to cater for different tastes and preferences. For each individual profile you can select the portion sizes for each drink (see "Setting the portion size"). The name of the current profile is shown in the top left of the display. – Change profile, to programme the coffee machine so that it changes back to the Miele standard profile automatically after each drink is dispensed or so that it retains the most recently selected profile.
Setting up profiles Deleting a profile ^ Touch "Process". ^ Touch "Delete profile". ^ Touch the profile you want and then "OK". Changing a profile You can programme the coffee machine so that it changes back to the Miele standard profile automatically after each drink is dispensed or so that it retains the most recently selected profile. ^ Touch "Process". ^ Touch "Change profile".
Processing drinks for a profile You can create your own drinks for each profile and set the portion size and drinks parameters, e.g. amount of coffee, brewing temperature for each drink individually. You can also change the names of the drinks and delete any unwanted drinks from the profile. A profile can contain a maximum of nine drinks. ^ Enter a name for the newly created drink (maximum of 8 characters) and touch "Save". The newly created drink will appear in the profile.
Settings You can use the "Settings" menu to customise the coffee machine to suit your requirements. Changing and saving settings ^ Touch "Main menu" or the # sensor. ^ Touch "Settings" % . Calling up the "Settings" menu Start in the drinks menu. ^ Touch "Main menu" or the # sensor. ^ Touch "Settings" % . You can now check or alter settings. Touch # to return to the previous menu. The settings which are currently selected will have a coloured frame around them.
Settings Possible setting options The factory setting for the option is shown in bold.
Settings Option Available settings Brightness Set Volume Buzzer tones Keypad tone Plate warmer On / Off / Automatic Mains water On / Off Spout adjustment On / Off Showroom programme Demo mode (On / Off) Factory default Do not reset Reset 44
Settings Language Clock type You can select the language (and country variant of that language) for all the display text. The time can be displayed as Tip: If you select the wrong language by mistake, follow the flag symbol F to find the "Language" option again. Time Analogue or You can set the time display, the clock format and the time.
Settings Timer There are two timers with the following functions: The coffee machine – switches on at a particular time, e.g. in the morning for breakfast ("Switch on at"). – switches off at a particular time ("Switch off at"). – switches off after a particular length of time if none of the sensors have been touched or a drink has not been made ("Switch off after"; Timer 1 only). You can also allocate timer functions to individual days of the week.
Settings Allocating days of the week Eco mode Select the day of the week you want. The day of the week selected will be marked with a tick 9. The Eco mode is an energy-saving mode. The steam system only heats up when a coffee or steam for hot milk or milk froth is selected. When all days of the week required are marked, ^ Touch "OK".
Settings Lighting Info (Display information) You have the following options: In the "Info" option, the number of portions prepared for each individual drink can be displayed. – You can set the brightness when the machine is switched on. – You can set the brightness when the machine is switched off. – You can specify when the lighting should switch off ("Switch off after").
Settings Water hardness Please see "Using for the first time" for information about water hardness. Brightness You can set the brightness of the display in the bar chart. Volume You can set the volume of the buzzer and keypad tones in the bar chart. Activating and deactivating the mains water connection The coffee machine is designed to be plumbed into the mains drinking water supply. Water is automatically taken into the water container when the machine is set up for a plumbed supply.
Settings Factory default You can reset the settings back to the ones which were set when the coffee machine was delivered - the factory default settings. Please refer to the "Possible setting options" chart for the factory settings which are shown in bold.
Cleaning and care Quick guide ,Clean the coffee machine every day to prevent a build-up of bacteria.
Cleaning and care ,Danger of burning. Allow the coffee machine to cool down before cleaning. Please be aware that the water in the drip tray will be very hot. Do not use a steam cleaning appliance to clean the coffee machine as this will damage the machine. Do not use cleaners containing chlorides, acids, soda or scouring agents. These would damage the surface. All surfaces are susceptible to scratching. Scratches on glass surfaces could even cause a breakage.
Cleaning and care Rinsing the coffee machine When a coffee drink has been dispensed, the coffee machine rinses itself before switching off to remove any remaining coffee residue. You can also rinse the coffee pipework manually. ^ Touch "Main menu" or the # sensor. Milk pipework All parts of the milk system need to be cleaned thoroughly and regularly Milk contains bacteria which proliferate rapidly with inadequate cleaning. A dirty machine can be harmful to health. ^ Touch "Maintenance" y.
Cleaning and care Cleaning the milk pipework using the cleaning agent for milk pipework All parts of the milk system need to be cleaned thoroughly and regularly Milk contains bacteria which proliferate rapidly with inadequate cleaning. A dirty machine can be harmful to health. The milk pipework must be cleaned at least once a week. The coffee machine will prompt you at the correct time. "Clean the milk pipework in 3 days" will appear in the display three days before the coffee machine is due to be cleaned.
Cleaning and care Milk flask and lid It is important to keep the neck and flange of the flask clean (whilst filling it and carrying it). If the flask is dirty it could cause a fault with the machine. ^ Clean the milk flask in the dishwasher or by hand using hot water and a little washing-up liquid. Dry the milk flask thoroughly. ^ Fill the water container up to the 8 mark with lukewarm water and stir the solution. Before placing the lid in the dishwasher: Follow the instructions on the packet carefully.
Cleaning and care Central spout Clean the cover of the central spout by hand only using hot water and a little washing-up liquid. All other parts are dishwasher safe. The central spout must be in the maintenance position for cleaning. Otherwise you will not be able to remove the parts. If there is a container underneath the central spout, make sure that you remove this as it would prevent the central spout from moving into the maintenance position.
Cleaning and care ^ Turn upper connecting piece a and pull it upwards to remove it. Remove lower connecting piece b in the same way. ^ Pull off dispensers c. The Y-piece connnector must not be removed. ^ Reassemble the dispensing unit in the reverse order: Make sure that upper connecting piece a clicks into position. Press dispensers b firmly onto the dispensing unit. ^ Replace the dispensing unit in the central spout. ^ Replace the cover. ^ Clean all parts thoroughly.
Cleaning and care Conditioning the milk valve Sensor cover The milk valve should be cleaned once a week to ensure good quality milk froth. The sensor cover for the cup protection cut-out is located under the central spout. If the automatic spout adjustment sensors do not clearly recognise a container, this sensor will stop the central spout. ^ Touch "Main menu" or the # sensor. ^ Touch "Maintenance" y. ^ Touch "Clean the central spout". The central spout will move into the maintenance position.
Cleaning and care Water container Waste container Change the water every day to prevent a build-up of bacteria. After a certain period of time a reminder to empty the waste container will appear in the display. The waste container must be cleaned when this message appears. However, it is better to clean the waste container every day to prevent coffee grounds from turning mouldy. There will probably also be water in the waste container left over from the rinsing process.
Cleaning and care Drip tray Clean the drip tray every day to prevent unpleasant odours and mildew. A message will appear in the display when the drip tray is full and needs to be emptied. Remove the tray and empty it at the latest when this message appears. ,Danger of burning. If the rinsing process is in progress, wait a while before removing the drip tray so that you catch any remaining water from the system. ^ Open the machine front, and carefully remove the drip tray from the machine.
Cleaning and care Drip tray cover Central spout connector ^ Remove the drip tray cover. The part which connects the brew unit and the central spout is located on the inside of the machine door. ^ It can be cleaned in the dishwasher or by hand using hot water and a little washing-up liquid. ^ Dry the drip tray thoroughly. ^ Clean this connection regularly with a damp cloth, taking care not to wipe the grease off the cap. ^ Refit the cover on the drip tray making sure that it sits flush at the front.
Cleaning and care Interior and machine front ^ First take out all removable parts and then clean the interior and the machine front with a mild solution of hot water and washing-up liquid. Tip: Use your vacuum cleaner to remove dry coffee grounds. A small drip catcher is located inside the front of the machine at the bottom. Brew unit Clean the brew unit by hand only using hot water. Do not use washing-up liquid or any other cleaning agent. The moving parts of the brew unit are lubricated.
Cleaning and care If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (see "Problem solving guide"). When the brew unit has been pulled out, do not alter the position of the brew unit handle. This would displace the brew unit and it would not fit back into the coffee machine. ^ Clean the brew unit by hand under hot running water without using washing-up liquid or any other cleaning agent.
Cleaning and care Degreasing the brew unit Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. Therefore use the cleaning tablets supplied to clean the brew unit. When "Place a cleaning tablet in the ground coffee chute and close the chute" appears in the display: These have been specially formulated for use in this coffee machine and are available to order from Miele (see back page for contact details), your Miele dealer or via the internet at www.
Cleaning and care Machine front If soiling is not removed promptly it could cause the surfaces of the machine to alter or discolour. Remove any soiling immediately. Make sure that water cannot get in behind the display. All external surfaces are susceptible to scratching. Scratches on glass surfaces could even cause a breakage. Contact with unsuitable cleaning agents can discolour the surfaces. Wipe up any spillages or splashes of descaling agent immediately.
Descaling Limescale builds up in the coffee machine during use. How often, will depend on the hardness of the local water supply. Limescale must be removed regularly. The machine will guide you through the descaling procedure. Various instructions will appear in the display, e.g. you will be prompted to empty the drip tray, fill the water container, etc. Descaling must be carried out. The process takes approx. 20 minutes.
Descaling ^ Touch "OK". The coffee machine has now been descaled and can be used for making drinks again. When descaling the machine, wipe up any spillages or splashes of descaling agent immediately. These would damage the surface. ^ Fill the water container up to the F symbol with lukewarm water. ^ Drop two descaling tablets in the water. Follow the instructions for the mixing ratio carefully. It is important that you fill the water container with the correct amount of water.
Problem solving guide With the aid of the following guide, minor problems can be easily corrected without contacting Miele. ,Warning. Do not open the outer casing of the machine. Repairs may only be carried out by a suitably qualified and competent person in strict accordance with national and local safety regulations. Repairs and other work by unqualified persons can cause considerable danger to users. The manufacturer cannot be held liable for unauthorised work.
Problem solving guide Message Possible cause and remedy Fault 73 The brew unit cannot move into the correct position or it is dirty and the ground coffee cannot be processed. or Try to remove the brew unit (see "Cleaning and care – ^ "Check brew unit" Brew unit"). ^ If you can, take it out and clean it (see "Cleaning and care – Brew unit"). ^ Push the coffee ejector of the brew unit into the correct position (see illustration). ^ Replace the waste container and the water container in the coffee machine.
Problem solving guide Message Possible cause and remedy Fault 234 The cup protection cut-out has been triggered during the making of three drinks since the coffee machine was switched on. The cups or glasses being used have not been clearly recognised by the automatic spout adjustment function. ^ Use cups or glasses which can be recognised by the automatic spout adjustment function. There is a fault with the automatic spout adjustment. ^ Switch the coffee machine off with the On/Off sensor K.
Problem solving guide Message Possible cause and remedy "Push the water The water container is not positioned correctly inside the container in until it machine. engages" ^ Remove the water container and replace it. This fault message also appears if the water container was not correctly filled and positioned for descaling. ^ Fill the water container with fresh tap water up to the F symbol and start the descaling process again. The plumbed in water supply is not working.
Problem solving guide Unusual performance of the coffee machine Problem Possible cause and remedy When the coffee machine is switched on the lighting does not come on. The lighting has been switched off. ^ Switch it back on (see "Settings - Lighting"). The display remains dark when the coffee machine is switched on using the On/Off sensor K. The On/Off sensor K was not touched for long enough. ^ Touch the depression in middle of the On/Off sensor K for at least 3 seconds. The lighting is faulty.
Problem solving guide Problem Possible cause and remedy The coffee machine does not switch itself on, although the "Switch on at" setting has been activated for the timer. The system lock is activated. ^ Deactivate the system lock (see "Settings - System lock"). You cannot read the display. The display brightness has been set too low.
Problem solving guide Problem Possible cause and remedy There is no milk or The milk pipework or the air intake tube is blocked. milk froth being ^ Follow the instructions in "Cleaning blockages from the dispensed from milk pipework". the central spout. "Fill and insert milk The lid of the milk flask could be dirty preventing the sensors flask" appears in from working properly. the display ^ Clean the milk flask and the lid thoroughly (see "Cleaning although the milk blockages from the milk pipework").
Problem solving guide Problem Possible cause and remedy Drink preparation is cancelled. If the water container becomes empty while a drink is being made, after the water container is filled and replaced "Continue? Yes / No" will appear in the display. If you do not confirm "Yes" within 5 minutes, the drink will be cancelled. The plumbed in water supply is not working. ^ Check whether the inlet hose has become kinked or the stopcock is not fully open.
Problem solving guide Problem Possible cause and remedy The cup protection cut-out is not working. The central spout moves to the rim of the cleaning container and becomes wedged against the rim. If the cleaning container is very close to or touching the rear panel, the automatic spout adjustment will not detect it properly. ^ Move the cleaning container slightly further forward.
Problem solving guide Unsatisfactory results Problem Possible cause and remedy The consistency of The temperature of the milk is too high. Cold milk (below the milk froth in 13° C) gives the best results for milk froth. unsatisfactory. ^ Check the temperature of the milk in the milk flask. The milk pipework or the air intake tube is blocked. ^ Follow the instructions in "Cleaning blockages from the milk pipework".
Problem solving guide Problem Possible cause and remedy The crema on the The grinder setting is not correct. coffee or espresso ^ Set the grinder on a finer or coarser setting (see "Grinder is not as it should setting"). be. The brewing temperature is too high for this type of coffee. ^ Set a lower brewing temperature (see "Brewing temperature"). The coffee beans are no longer fresh. ^ Add new coffee beans to the coffee bean container.
Cleaning blockages from the milk pipework If you notice that the quality of the milk froth is not satisfactory, this could be caused by a blockage in the air intake tube. Follow the instructions in "Step 2: Cleaning the air intake tube and the angled connector in the inside of the machine front" Step 1: Cleaning the milk pipework in the lid of the milk flask If only steam instead of milk is coming out of the central spout, follow the instructions in Steps 1 to 3.
Cleaning blockages from the milk pipework To reassemble the lid:. ^ First insert the seal in the lid. Then fit the milk intake tube into the seal. Make sure that you do not fit the slanted end of the milk intake tube into the seal. Step 2: Cleaning the air intake tube and the angled connector in the inside of the machine front Do not use a needle or similar implement. This would damage the components. ^ First release air intake tube a from opening c. Then pull off angled connector b.
Cleaning blockages from the milk pipework ^ Push the tubes back onto the angled connector and replace this in the machine. ^ Re-insert the air intake tube into opening c. Step 3: Maintaining the milk valve and cleaning the milk pipework in the central spout ^ Touch "Main menu" or the # sensor. ^ Touch "Maintenance" y. ^ Touch "Clean the central spout". The central spout will move into the maintenance position. Important.
After Sales / Guarantee In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). Please note that telephone calls may be monitored and recorded for training purposes (UK only). When contacting your Dealer or Miele, please quote the model and serial number of your machine. These are shown on the data plate inside the machine. N.B.
Saving energy Changing the following settings from their factory default will increase the energy consumption of the coffee machine: – Eco mode – Lighting – Time of day display – Timer When altering these settings, the message "This setting increases energy consumption" will appear in the display.
Plumbed in water connection Notes on connecting to the mains water supply Connection to the mains water supply should only be carried out by a qualified and competent person. Disconnect the coffee machine from the mains electricity supply before connecting it to the mains water supply. Close the stopcock before connecting the water intake hose to the machine. The water quality must conform to the requirements for drinking water in the country the machine is being installed in.
Plumbed in water connection Connection to the water inlet A faulty stainless steel hose must only be replaced by a genuine Miele replacement hose (available from Miele). Make sure that the water hose is suitable for food use. Fitting the stainless steel hose to the coffee machine Make sure that the stainless steel hose is not kinked or damaged. The stainless steel hose must not be shortened. Before making plumbing connections, ensure that the machine is disconnected from the mains electrical supply.
Electrical connection U.K., ZA, IRL All electrical work should be carried out by a suitably qualified and competent person only, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure power is not supplied to the machine until after installation work has been carried out.
Installation Building-in and combination options The machine is designed for installation in a tall unit. It can also be combined with other Miele built-in appliances. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them (except when it is combined with a suitable Miele built-in plate or food warming drawer).
Installation Ventilation Ensure that the back of the coffee machine is sufficiently ventilated so that steam and warm air can dissipate freely. To align the machine front with the furniture front ensure that there is a sealing strip provided all the way around the building-in niche or around the coffee machine. The ventilation gaps in the furniture housing unit and the gap between the top of the housing unit and the ceiling must be at least 200 cm2.
Installation Tip: It is useful to have somewhere at the height of the niche to place the machine on. This makes electrical connection and connection to the plumbed in water supply easier. ^ Using the large allen key, unscrew all four feet underneath the machine out by approx. 2 mm. The feet can be unscrewed by up to approx. 10 mm. ^ Plumb the appliance into the mains water supply (see "Plumbed in water supply"). Four M5 hexagon socket screws are supplied for aligning and securing the machine in its niche.
Installation Adjusting the hinges If the machine front becomes difficult to open or close after installation you can adjust the hinges to realign it: ^ Turn screw a to align the front of the machine so that it is flush with the front of the housing unit. ^ Turn screw b to align the front of the machine horizontally and vertically.
Copyright and licences Miele uses software to operate and control the steam oven. The copyright authorisation from Miele and other relevant software suppliers (e.g. Adobe) must be respected. Miele and their suppliers reserve any rights to the software components. In particular the following are prohibited: – Copying and distribution, – Modifications and derivations, – Decompilation, reverse engineering, disassembling and other such reductions of the software.
Alteration rights reserved / 2013 CVA 6805 (C) M.-Nr.