Operating and Installation Instructions
Table Of Contents
- Rückseite_ClassicC1_USA_27112014.pdf
- en - Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the vacuum cleaner 8
- Before using the vacuum cleaner 10
- Using the included accessories 11
- Attaching the floor tool/brush 11
- Operation 11
- Parking, transport and storage 12
- Maintenance and care 12
- Purchasing new FilterBags and filters 13
- Which dustbags and filters are the right ones? 13
- When to change the FilterBag 13
- Replacing the FilterBag 14
- When to change the dust compartment filter (Pre-motor filter) 14
- Replacing the dust compartment filter (Pre-motor filter) 14
- When to replace the AirClean exhaust filter 14
- Replacing the AirClean filter 15
- Exchanging exhaust filters 15
- When to change the HEPA AirClean 30 exhaust filter 15
- Replacing the HEPA AirClean 30 exhaust filter 15
- When to change the thread catcher on the standard floor brush 15
- Changing the thread catcher on the standard floor brush 15
- Cleaning and care 15
- Frequently asked questions 16
- After sales service 16
- Optional accessories 16
- Caring for the environment 17
- fr - Table des matières
- INSTRUCTIONS IMPORTANTES DE SÉCURITÉ 22
- Guide de l'appareil 26
- Avant d'utiliser l'aspirateur 28
- Utilisation des accessoires fournis 29
- Fonctionnement 29
- Immobilisation, transport et rangement 31
- Les sacs à poussière et les filtres convenant à votre appareil 31
- À quel moment remplacer le sac à poussière 32
- Remise en place du sac à poussière 32
- À quel moment remplacer le filtre du réservoir à poussière (filtre situé devant le moteur) 33
- Remplacement du filtre du réservoir à poussière (filtre situé devant le moteur) 33
- À quel moment remplacer le filtre d'évacuation AirClean 33
- Remplacement du filtre AirClean 33
- Interchangement des filtres d'évacuation 33
- À quel moment remplacer le filtre d'évacuation HEPA AirClean 30 34
- Remplacement du filtre HEPA AirClean 30 34
- À quel moment remplacer les capteurs de fils sur la brosse à plancher standard 34
- Remplacement des capteurs de fils sur la brosse à plancher standard 34
- Nettoyage et entretien 34
- Questions fréquemment posées 35
- Service après-vente 35
- Accessoires offerts en option 35
- Protection de l'environnement 36
- en - Contents
–
FilterBag
–
Exhaust filter
–
Dust compartment filter
Each of these components must be
changed periodically to maintain the
vacuum cleaner’s efficiency.
Only use Miele FilterBags, filters and
accessories with the "Original Miele"
logo. Only then can the suction
power of the vacuum cleaner reach
its optimum potential creating the
best possible cleaning results.
,
The use of dustbags made of
paper or a similar material, or
dustbags with a cardboard retaining
plate can lead to serious damage to
the vacuum cleaner and possibly
voiding the warranty, just as with the
use of dustbags without the
"Original Miele" logo.
Purchasing new FilterBags and
filters
Original Miele FilterBags and filters can
be purchased from an authorized Miele
vacuum dealer or by visiting the Miele
store at http://store.miele.com.
Which dustbags and filters are the
right ones?
This vacuum cleaner uses Original
Miele FilterBags Type G/N and an
Original Miele filters, the "Original Miele"
Logo will appear on the packaging or
directly on the FilterBag.
An "AirClean" exhaust filter and a dust
compartment filter are supplied with
every box of Miele FilterBags.
If you would like to purchase additional
Miele filters separately, contact your
vacuum dealer or Miele, please quote
the model number of your Miele vacuum
cleaner to ensure correct parts are
ordered. These parts are also available
to order from the online Miele store.
The exhaust filter supplied with the
vacuum cleaner can be exchanged
with another type of Original Miele filter
(see "Exchanging exhaust filters").
When to change the FilterBag (see
fig. 16)
Change the FilterBag when the colored
marker in the airflow indicator fills the
display.
Miele FilterBags are disposable and
made to be used only once. Do not
attempt to reuse.
Checking the airflow indicator
^
Attach the standard floor brush
(depending on model) to the vacuum
cleaner. Perform this test with the
floor brush only, since other
attachments can affect the function
of the airflow indicator.
en
13