User manual
en
42
For safety reasons when vacu-
uming stairs, it is best to start at the
bottom of the stairs and move up-
wards.
Use
To unwind the mains cable
(dia. 16)
Pull the mains cable out to the re-
quired length.
If vacuuming for longer than
30minutes, the mains cable must be
pulled out to its fullest extent. Other-
wise there is a danger of overheating
and damage.
To rewind the cable
Switch off at the wall socket and re-
move the plug.
Press the rewind foot switch. The
cable will rewind automatically.
To switch on and off (dia. 17)
Press the On/Off foot control .
During vacuuming
When vacuuming, in particular
fine dust, e.g. sawdust, sand, plaster,
flour, talcum powder etc., electro-
static charges build up naturally. Un-
der certain conditions these charges
will be released. To avoid the un-
pleasant effects of these discharges,
a metal inlay has been incorporated
into the underside of the handle.
Please make sure that you keep your
hand in constant contact with this
metal strip during vacuuming (dia.
18).
To regulate the suction power
(dia. 19)
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to man-
oeuvre the floorhead.
The vacuum cleaner has symbols on
the controls which indicate the type of
use the settings are suitable for.
Curtains, fabric
Upholstery, cushions
Cut pile carpets, rugs and runners
Energy-saving vacuuming. This
setting is also very quiet
Loop pile carpet and rugs
Hard flooring and heavily soiled
carpets and rugs
Turn the suction power selector
manually to the suction power setting
you require.