User manual

Operating the tumble dryer
19
Display
g
Time display
The programme duration remaining
will be displayed in hours : minut
es.
The duration displayed for the
Cott
ons, Minimum iron, Delicates,
Express, Denim, Gentle smoothing
programmes may vary or "jump".
The following factors, among others,
affect the programme duration
displayed: the quantity of laundry,
the type of fabric and the residual
moisture in the laundry. The
electronics continually assess
conditions in the appliance and then
adjust the programme duration with
increasing accuracy.
h
Check/fault indicators
These are only visible when
necessa
ry.
 ...
...
empty the condensed water
container or check the drain hose
 ...
...
clean the plinth filter/airways
 ...
...
technical fault, call the Service
Department
i
Drying level display
For selecting the drying level for
pr
ogrammes with a selectable
drying level. See "  sensor".
j
 sensor
This sensor has two functions.
T
ouching the symbol will . . .
. . . select a later start time for the
programme (delay start).  will
flash during selection,  will light
up constantly when the delay start
time is counting down.
. . . select the duration of the Warm
air programme.  will flash during
selection.
k
Perfect Dry i
ndicator
With programmes with a selectable
dr
ying level, the Perfect Dry system
calculates the residual moisture
present in the laundry to ensure a
precise drying result.
The P
erfect Dry indicator . . .
. . . will flash after the programme
has started and go out when the
programme duration appears in the
display.
. . . will light up again when the
selected drying level is reached and
remain on until the end of the
programme.
. . . will remain dark with the
following programmes: Woollens
handcare, Silks handcare, Warm air.
l
 sensor
Touching this symbol will select the
d
rying level required which will then
light up .