User manual

Problem Possible cause Remedy
The programme has
stopped. The
Anti-crease/Finish
lamp has come on in
the sequence display
and the buzzer is
sounding.
This is not a fault.
The electronic unit has
recognised that there is no
laundry in the drum and
cancelled the programme.
Drying individual garments
or items which are already
dry can also cause the
programme to be stopped.
Use the "Timed drying -
Warm air" programme to
dry individual items.
Before changing a
programme: Open and
close the drum door.
The programme has
been interrupted. The
indicator lamp for
Hand iron or Machine
iron is flashing, and
the buzzer sounds.
No obvious cause.
–
Switch the dryer off and
then on again.
–
Then start the
programme again.
If the programme stops
again and the fault
message reappears there
is a fault. Contact the
Miele Service
Department.
Problem solving guide
31