User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Unpacking and installing
- Operation
- Before using for the first time
- Filling the water container
- Filling the coffee bean container
- Switching on and off
- Spout adjustment
- Cup heating
- Making coffee
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Clean the drip tray and waste container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the central spout with integrated Cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipework manually or using the maintenance programme
- Clean the bean container
- Ground coffee drawer cleaning
- Cleaning the casing
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic descaling
- Problem solving guide
- After sales service and warranty
- Transporting the machine
- Accessories
- Saving energy
- Electrical connection
- Dimensions
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Operation
22
Entering numbers
Use the numerical keypad to enter
numbers, e.g. if you want to set a timer
duration. The numerical keypad will
appear automatically in the relevant
menus.
Touch the numbers you want.
Once you have entered an accepted
value, the OK field will light up green.
Touch OK.
You can delete one character at a time
using the arrow sensor.
Entering letters
Profile names or the names for your
own drinks are entered using a
keyboard.
It is best to select short names (max. 8
characters).
Further letters or symbols can be
accessed using the and arrow
sensors. Numbers can be found by
touching the123sensor.
Save
Space
Select the letters or characters you
want.
TouchSave.