User manual

Portion size
45
The flavour of the coffee produced
depends not only on the type of coffee,
but also on the amount of water used.
You can programme the amount of
water for all coffee drinks, tea and hot
water to suit the size of your cups and
to suit the type of coffee you are using.
This does not alter the amount of coffee
used.
For coffee drinks with milk you can also
set the amount of milk or milk froth to
suit your personal taste. You can also
set the portion sizes for hot milk and
milk froth.
The changed portion size is always
saved in the current profile. The name
of the current profile is shown in the
top left of the display.
If the water container becomes empty
whilst making a drink, the machine will
stop programming the portion size.
The portion size will not be saved.
Start in the Drinks menu.
 Place the cup you want under the
central spout or hot water spout.
 Select Process.
 Touch Change drink.
 Select the drink and then
touchPortion size.
If you have selected a drink with milk
or tea, portion programming will start
immediately. Portion size does not need
to be opened separately.
The drink will be made and Save will
appear in the display, as soon as the
minimum dispensing amount is
reached.
 When the cup is filled to the level you
want, touch Save.
If the maximum amount is reached,
preparation stops and the maximum
possible amount is saved.
If you want to change the portion size
for coffee drinks made with milk or hot
water, the ingredients which make up
the drink will be saved one after the
other while the drink is being made.
The programmed mix of ingredients and
portion sizes will now be dispensed
every time that particular drink is
selected.