manual

Cleaning and care
49
 Release the upper section with the
holder for the milk pipework from the
dispensing spouts.
 Clean all parts thoroughly.
 Clean the surfaces of the main
dispenser and the dispensing spouts
with a damp cloth.
If the milk pipework is blocked, clean it
under running water with the brush
supplied:
 Insert the brush in the pipework.
Move it back and forth until all milk
residue has been removed.
Reassembling the main dispenser
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
 Reassemble the dispensing unit.
 Refit the dispensing unit onto the
main dispenser. Press firmly to
ensure the dispensing unit is securely
fitted without any gaps.
 Replace the stainless-steel cover and
connect the milk pipe if applicable.