Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Controls and indicators
- Accessories
- Operation
- Before first use
- Water hardness
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Grinder setting
- Amount of coffee, brew temperature, and pre-brewing
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Grounds container, drip tray, and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Main dispenser
- Milk pipe
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the menu
- Rinsing the machine
- Rinsing the milk pipe
- Cleaning the milk pipe with the maintenance program
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Transport
- Frequently Asked Questions
- Service and warranty
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Settings
39
The following will not be reset:
- The number of drinks dispensed
and the appliance status (No. of
portions until appliance needs
descaling,...brew unit needs
degreasing)
- Language
- Profiles and the associated drinks
(CM5410, CM5510, CM5710)
Demo mode (showroom
program)
Do not activate this setting for
domestic use.
The Showroom programfunction enables
the coffee machine to be demonstrated
in stores or showrooms. Although the
sensor buttons and display seem to be
working, the thermo block is not being
heated. The appliance does not
dispense any drinks, run maintenance
programs, or save any settings.
You can activate demo mode without
commissioning the appliance. The
water container is empty or not
inserted. Switch the coffee machine
on. As soon as the Fill and replace the
water container message appears,
touch the button for 5seconds.
Demo mode is activated.