Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Controls and indicators
- Accessories
- Operation
- Before first use
- Water hardness
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Grinder setting
- Amount of coffee, brew temperature, and pre-brewing
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Grounds container, drip tray, and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Main dispenser
- Milk pipe
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the menu
- Rinsing the machine
- Rinsing the milk pipe
- Cleaning the milk pipe with the maintenance program
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Transport
- Frequently Asked Questions
- Service and warranty
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Cleaning and care
45
Pull the dispensing unit down to
remove it.
Release the upper section with the
holder for the milk pipe from the
dispensing spouts.
Clean all parts thoroughly.
Clean the surfaces of the main
dispenser and the dispensing spouts
with a damp cloth.
If the milk pipe connecting pieces are
blocked, clean them under running
water with the brush supplied:
Insert the brush into the pipe
connecting piece. Move it back and
forth until all milk residue has been
removed.
If you have released the connecting
piece from the milk pipe: when
reassembling, ensure that the smaller,
thinner end of the connecting piece is
pushed into the hose.