Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Controls and indicators
- Accessories
- Operation
- Before first use
- Water hardness
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Grinder setting
- Amount of coffee, brew temperature, and pre-brewing
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Grounds container, drip tray, and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Main dispenser
- Milk pipe
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the menu
- Rinsing the machine
- Rinsing the milk pipe
- Cleaning the milk pipe with the maintenance program
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Transport
- Frequently Asked Questions
- Service and warranty
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Cleaning and care
49
The cleaning process cannot be
canceled. It must be completed
through to the end.
Confirm withOK.
The process will start.
Follow the instructions in the display.
Place milk pipe in cleaning agent will
appear in the display.
Making a cleaning solution:
Dissolve the cleaning agent in a
container with approx. 1cup (200ml)
of lukewarm water. Stir the solution
with a spoon until the powder has
fully dissolved.
Carrying out the cleaning process:
Place the container next to the
machine and hang the milk pipe in
the cleaning solution. Make sure that
it is sufficiently immersed in the
cleaning solution.
Confirm withOK.
Follow the additional instructions
given in the display.
The cleaning process is complete when
rinsing has finished.
Tip: Rinse any residual cleaning agent
out of the milk pipe with running water.