Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Controls and indicators
- Accessories
- Operation
- Before first use
- Water hardness
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Grinder setting
- Amount of coffee, brew temperature, and pre-brewing
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Grounds container, drip tray, and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Main dispenser
- Milk pipe
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the menu
- Rinsing the machine
- Rinsing the milk pipe
- Cleaning the milk pipe with the maintenance program
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Transport
- Frequently Asked Questions
- Service and warranty
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Water hardness
22
Water hardness is an indication of the
amount of minerals dissolved in water.
The more minerals in the water, the
higher the water hardness. The harder
the water is, the more frequently the
coffee machine needs to be descaled.
The coffee machine measures the
amount of water used and steam made.
Depending on the level of water
hardness set, more or fewer drinks can
be dispensed before the appliance
needs to be descaled.
Program the coffee machine to the
water hardness level of your area so
that it functions correctly and does not
get damaged. A prompt to descale the
machine will then appear in the display
at the correct time.
Your local water authority will be able to
tell you the hardness of the water in
your area.
The water hardness level is set to 3 at
the factory.
The appliance has 4programmable
hardness levels:
°dH gr/gal ppm
(mg/l CaCO
3
)
Set-
ting*
0–8.4 0–8.7 0–150 Soft1
8.4–14 8.7–14.6 150–250 Medium2
14–21 14.6–21.9 250–375 Hard3
>21 >21.9 >375 Veryhard
4
* The hardness levels shown in the display may
differ from the hardness level designations in your
area. You must follow the values in the chart to
set the correct water hardness level for your area.
Setting water hardness
Tap the sensor button.
SelectSettings | Water hardness and
confirm withOK.
Select the hardness level and confirm
withOK.
The setting is now saved.