Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Controls and indicators
- Accessories
- Operation
- Before first use
- Water hardness
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Grinder setting
- Amount of coffee, brew temperature, and pre-brewing
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Grounds container, drip tray, and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Main dispenser
- Milk pipe
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the menu
- Rinsing the machine
- Rinsing the milk pipe
- Cleaning the milk pipe with the maintenance program
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Transport
- Frequently Asked Questions
- Service and warranty
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Grinder setting
32
The grinder setting determines the
contact time between the ground coffee
and the water, known as the extraction
time. When the ideal grinder setting is
selected, the machine dispenses a
perfect cup of coffee with a fine,
hazelnut-brown crema.
The grinder setting you select will be
used for all coffee drinks.
There are various ways to tell whether
the coffee grinder is set correctly.
The grinder setting is too coarse if the
coffee or espresso is watery and tastes
acidic. The crema is very pale.
Set a finer grinder setting.
The grinder setting is too fine if the
coffee or espresso tastes too bitter and
the crema is dark brown.
Set a coarser grinder setting.
Only adjust the grinder one setting at
a time.
Start making a new drink to grind
beans again. Adjust the grinder
setting one setting at a time again.
Open the service panel.
Push the slide control one setting to
the left (for finer grinding) or one
setting to the right (for coarser
grinding).
Close the service panel.
Make one cup of coffee.
After this, you can adjust the grinder
setting again.
The altered grinder setting will not be
used until after the second coffee has
been dispensed.