Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Controls and indicators
- Accessories
- Operation
- Before first use
- Water hardness
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Grinder setting
- Amount of coffee, brew temperature, and pre-brewing
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Grounds container, drip tray, and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Main dispenser
- Milk pipe
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the menu
- Rinsing the machine
- Rinsing the milk pipe
- Cleaning the milk pipe with the maintenance program
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Transport
- Frequently Asked Questions
- Service and warranty
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Profiles
36
(CM5410, CM5510, CM5710)
In addition to the Miele drinks menu
(Miele profile), you can create individual
profiles to cater for different tastes and
preferences.
Within the profile, you can adjust the
portion sizes and parameters
individually for all drinks.
The name of the current profile is
shown in the top left of the display.
Creating profiles
Tap the sensor button and select
Profiles. Confirm withOK.
TheProfiles menu opens.
Select Create profile.
The editor will open in the display.
Enter the profile name:
- To enter a character, highlight the one
you want and confirm your choice
withOK.
- To delete a character, tap the
sensor button.
- To save the name, select the
checkmark and confirm withOK.
The profile is created.
Changing drinks within a
profile
When you change the parameters of a
drink within a profile, these settings only
apply to the active profile. The settings
for drinks contained within other
profiles remain unaffected.
Select the profile you want.
The name of the selected profile is
shown in the top left of the display.
You can now change the drinks
individually.
Making drinks stored in a
profile
Place a suitable container under the
main dispenser.
Tap the sensor button and select
Profiles.
Select the profile you want and
confirm withOK.
Select the drink you want.
The machine starts dispensing the
drink.
Changing the name
This selection is only possible if a
profile has been allocated in addition
to the Miele standard user profile.
Use the arrow buttons to select
Change name and tap OK.
Proceed the same as with “Create
profile”:
- Select to delete a character.
- To enter new characters, highlight the
relevant character and confirm with
OK,
- Save the new name by selecting in
the display and tapping OK.