Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Controls and indicators
- Accessories
- Operation
- Before first use
- Water hardness
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Grinder setting
- Amount of coffee, brew temperature, and pre-brewing
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Grounds container, drip tray, and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Main dispenser
- Milk pipe
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the menu
- Rinsing the machine
- Rinsing the milk pipe
- Cleaning the milk pipe with the maintenance program
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Transport
- Frequently Asked Questions
- Service and warranty
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Frequently Asked Questions
57
Problem Possible cause and solution
F73 or
Check the brew unit
The brew unit cannot be positioned correctly.
Switch the coffee machine off with the On/
Offbutton.
Unplug the coffee machine. Wait for two minutes
before inserting the electrical plug back in the
socket.
Remove the brew unit and rinse under running
water.
Push the coffee ejector of the brew unit into the
correct position.
Do not insert the brew unit. Close the service
panel and switch the coffee machine on with the
On/Offbutton.
This will initialize the brew unit motor and put it back
into the start position.
When Insert the brew unit appears in the display, put
the brew unit back in the appliance. Close the
service panel.