Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Controls and indicators
- Accessories
- Operation
- Before first use
- Water hardness
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Grinder setting
- Amount of coffee, brew temperature, and pre-brewing
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Grounds container, drip tray, and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Main dispenser
- Milk pipe
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the menu
- Rinsing the machine
- Rinsing the milk pipe
- Cleaning the milk pipe with the maintenance program
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Transport
- Frequently Asked Questions
- Service and warranty
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Cleaning and care
46
Reassembling the main dispenser
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
Reassemble the dispensing unit.
Refit the dispensing unit onto the
main dispenser. Press firmly to
ensure the dispensing unit is securely
fitted without any gaps.
Replace the stainless steel cover and
connect the milk pipe if required.
Milk pipe
Risk to health due to inadequate
cleaning.
Milk naturally contains bacteria. Heat
and moisture inside the coffee
machine can cause these bacteria to
multiply, e.g., milk residues can go
off and pose a risk to health.
Clean all components in which milk
is transported thoroughly on a
regular basis.
The milk pipe must be cleaned approx.
every 5days.
There are two options for cleaning the
milk pipework:
- You can remove and dismantle the
main dispenser with its integrated
Cappuccinatore and either wash it in
the dishwasher or by hand with warm
water and liquid dish soap (see “Main
dispenser with integrated
Cappuccinatore”).
- Or you can clean the milk pipework
using the Clean milk pipework
maintenance program together with a
cleaning agent for milk pipework (see
“Maintenance programs – Cleaning
the milk pipework”).
Tip: In addition to your weekly cleaning
routine, we recommend carrying out the
alternative cleaning procedure once a
month. For example, if you manually
clean the machine once a week, then
you should run the Clean milk pipework
maintenance program once a month.
This combination will ensure that the
milk pipework is cleaned optimally.