Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Cup heating
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Making coffee with milk
- Grinder setting
- Amount of coffee, brew temperature and pre-brewing
- Portion size
- User profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray and grounds container
- Drip tray cover
- Water container
- Stainless steel water intake valve filter
- Main dispenser with cappuccinatore
- Stainless steel milk flask
- Milk pipework
- Bean container and ground coffee chute
- Housing
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework with the maintenance program
- Degreasing the brew unit and cleaning inside
- Descaling the machine
- Frequently Asked Questions
- Transport
- Technical Service
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Portion size
39
Changing the portion size in
the Parameters menu
You can adapt the portion sizes for
lungo coffee, caffè latte, hot milk,
and milk froth using using the "Pa-
rameters" menu.
Place a suitable container under the
main dispenser.
Tap .
Select the desired drink.
Select Portion size and tap OK.
From this point onwards the procedure
is identical to programming the portion
size during drink preparation.
Changing the portion size for
different user profiles
You can set the portion size for individ-
ual drinks for each user profile.
Tap.
Select the user profile.
The name of the current user profile is
shown at the top left of the display.
Now you can adjust the portion sizes as
described above.